[Wed Jun 19 06:21:42 2013] Detection parameters:
  Position = (434.2, 435.9) = 3 2 4.24 0 16 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.2 +/- 18.1
  Background counts = 15.4
  Rate = 0.004 +/- 0.0004

[Wed Jun 19 06:21:42 2013] Off-axis axis estimate = 14.00'
[Wed Jun 19 07:53:53 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:53:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 07:53:53 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Wed Jun 19 07:53:53 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.952
[Wed Jun 19 07:53:53 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.43"
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src5.csv
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src5.csv
[Wed Jun 19 08:58:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 19 08:58:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:38 2013] Spatial fit model total counts = 339.179000, observed total counts = 287.000000
[Wed Jun 19 10:00:38 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 10:00:38 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:38 2013] Assessing source extent using major
[Wed Jun 19 10:00:38 2013] Source does appear to be extended
[Wed Jun 19 10:00:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:21:51 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:21:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 11:21:51 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Wed Jun 19 11:21:51 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.952
[Wed Jun 19 11:21:51 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.43"
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 19 12:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src5.csv
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 19 12:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src5.csv
[Wed Jun 19 12:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 19 12:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 19 12:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 19 12:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:19:17 2013] Spatial fit model total counts = 338.770000, observed total counts = 287.000000
[Wed Jun 19 13:19:17 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 13:19:17 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:17 2013] Assessing source extent using major
[Wed Jun 19 13:19:17 2013] Source does appear to be extended
[Wed Jun 19 13:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 14:12:30 2013] XMMSAS src. selection expression = ellipse(37723.454834, 37870.628418, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 14:12:30 2013] Writing source region out to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8_src.reg
[Wed Jun 19 14:12:30 2013] Extracting stamp from image fullrun_mos1_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (397, 398) - (472, 473)
[Wed Jun 19 14:12:30 2013] XMMSAS bgd. selection expression = annulus(37723.454834, 37870.628418, 1087.500000, 2175.000000, X, Y) && !ellipse(37019.489746, 34903.041107, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 14:12:30 2013] Writing fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8.gif
[Wed Jun 19 14:13:38 2013] Mean detx,y = (12647.82, 7786.56) 
[Wed Jun 19 14:13:39 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 14:13:55 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 14:13:55 2013] Setting source spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jun 19 14:13:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jun 19 14:35:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 14:35:05 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:14 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:14 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 241.00
[Wed Jun 19 15:12:14 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 289.00
[Wed Jun 19 15:12:14 2013] Got source and background scale factors 1227850.000000, 6233880.000000
[Wed Jun 19 15:12:14 2013] User source parameters:
  Position = (434.2, 435.9) = 3 2 4.24 0 16 27.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 184.1 +/- 16.5
  Background aperture counts = 56.9
  Rate = 0.004 +/- 0.0003

[Wed Jun 19 15:12:14 2013] Updating counts from extracted products
[Wed Jun 19 15:12:14 2013] Set source signif. to 184.08/7.54 = 24.40
[Wed Jun 19 15:12:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:19 2013] Using photon index=1.80, rate=0.00386, arf fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8.arf
[Wed Jun 19 15:12:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:19 2013] Updating source flux to 8.9e-14
[Wed Jun 19 15:12:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 15:12:30 2013] xmm0041170101/analysis//spectral/fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete