[Wed Jun 19 06:21:42 2013] Detection parameters:
  Position = (449.8, 177.2) = 3 1 59.70 -0 2 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.8 +/- 11.9
  Background counts = 17.8
  Rate = 0.001 +/- 0.0002

[Wed Jun 19 06:21:42 2013] Off-axis axis estimate = 14.06'
[Wed Jun 19 07:53:53 2013] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:53:53 2013] Initial guess for spatial extent in simple fitting = 13.46"
[Wed Jun 19 07:53:53 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.948
[Wed Jun 19 07:53:53 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 13.46"
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jun 19 08:58:27 2013] Fit fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed Jun 19 08:58:28 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jun 19 08:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 19 08:58:28 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jun 19 08:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 19 08:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:38 2013] Spatial fit model total counts = 210.423000, observed total counts = 193.000000
[Wed Jun 19 10:00:38 2013] Offset between fit and detection position for source 40 = 0.551114 pixels
[Wed Jun 19 10:00:38 2013] 208.987500 total counts/ 142.293000 bgd. counts: snr = 5.591113
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.551114 pixels
  Position = (450.2, 177.6) = 3 1 59.59 -0 2 15.8
  Extent = 16.0 (11.7-22.4)" x 4.0 (3.4-5.6)", rotation angle = 309 (302-318) degrees
  Source counts = 66.7 +/- 14.5
  Background counts = 142.3
  Rate = 0.001 +/- 0.0003
[Wed Jun 19 10:00:38 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:38 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 10:00:38 2013] Source does appear to be extended
[Wed Jun 19 10:00:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.10
[Wed Jun 19 10:00:38 2013] Source is asymmetric
[Wed Jun 19 11:21:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:21:51 2013] Initial guess for spatial extent in simple fitting = 10.00"
[Wed Jun 19 11:21:51 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.958
[Wed Jun 19 11:21:51 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 10.00"
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 19 12:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src27.csv
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 19 12:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src27.csv
[Wed Jun 19 12:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 19 12:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 19 12:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 19 12:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:19:17 2013] Warning, spatial fit 27 centroid is now closest to src. 39
[Wed Jun 19 13:19:17 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:17 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 13:19:17 2013] Source does appear to be extended
[Wed Jun 19 13:19:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.10
[Wed Jun 19 13:19:17 2013] Source is asymmetric
[Wed Jun 19 14:12:30 2013] XMMSAS src. selection expression = ellipse(39119.641200, 15404.677820, 961.002028, 238.749007, 308.942100, X, Y)
[Wed Jun 19 14:12:30 2013] Writing source region out to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40_src.reg
[Wed Jun 19 14:12:30 2013] Extracting stamp from image fullrun_mos1_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (395, 122) - (505, 233)
[Wed Jun 19 14:12:30 2013] XMMSAS bgd. selection expression = annulus(39119.641200, 15404.677820, 1601.670046, 3203.340092, X, Y) && !ellipse(36995.177643, 16498.359436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37036.722800, 18006.041600, 503.581614, 503.581614, 0.000000, X, Y) && !ellipse(37007.325160, 13683.551600, 901.504026, 431.709612, 111.067276, X, Y) && !ellipse(41749.620911, 18518.759735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37528.865082, 16190.321609, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 14:12:30 2013] Writing fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40.gif
[Wed Jun 19 14:19:41 2013] Mean detx,y = (-9037.55, 13639.49) 
[Wed Jun 19 14:19:42 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 14:20:01 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 14:20:01 2013] Setting source spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Jun 19 14:20:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed Jun 19 14:40:39 2013] Not generating rmf since there are only 66 counts
[Wed Jun 19 14:40:39 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:16 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:16 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 71.00
[Wed Jun 19 15:12:16 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 590.00
[Wed Jun 19 15:12:16 2013] Got source and background scale factors 585032.000000, 8769407.000000
[Wed Jun 19 15:12:16 2013] User source parameters:
  Position = (450.2, 177.6) = 3 1 59.59 -0 2 15.8
  Extent = 16.0 (11.7-22.4)" x 4.0 (3.4-5.6)", rotation angle = 309 (302-318) degrees
  Source aperture counts = 31.6 +/- 9.5
  Background aperture counts = 39.4
  Rate = 0.0007 +/- 0.0002

[Wed Jun 19 15:12:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:19 2013] Using photon index=1.80, rate=0.0014, arf fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40.arf
[Wed Jun 19 15:12:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:19 2013] Updating source flux to 4.6e-14
[Wed Jun 19 15:12:27 2013] Source 40 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 15:12:30 2013] xmm0041170101/analysis//spectral/fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete