[Wed Jun 19 06:21:42 2013] Detection parameters:
  Position = (207.8, 202.7) = 3 3 9.89 -0 0 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.5 +/- 9.9
  Background counts = 14.0
  Rate = 0.001 +/- 0.0002

[Wed Jun 19 06:21:42 2013] Off-axis axis estimate = 9.56'
[Wed Jun 19 07:53:53 2013] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:53:53 2013] Initial guess for spatial extent in simple fitting = 11.21"
[Wed Jun 19 07:53:53 2013] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.924
[Wed Jun 19 07:53:53 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 11.21"
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src35.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src35.csv
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src35.csv
[Wed Jun 19 08:58:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 08:58:28 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Jun 19 08:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed Jun 19 08:58:28 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Jun 19 08:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed Jun 19 08:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:38 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 14.177379 pixels away
[Wed Jun 19 10:00:38 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:38 2013] Assessing source extent using major
[Wed Jun 19 10:00:38 2013] Source does appear to be extended
[Wed Jun 19 10:00:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:21:51 2013] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:21:51 2013] Initial guess for spatial extent in simple fitting = 11.21"
[Wed Jun 19 11:21:51 2013] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.924
[Wed Jun 19 11:21:51 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 11.21"
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src34.ximg exists
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Jun 19 12:19:24 2013] Fit fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src34 appears to have run properly
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Jun 19 12:19:25 2013] Fit fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Wed Jun 19 13:19:17 2013] Spatial fit model total counts = 125.588000, observed total counts = 116.000000
[Wed Jun 19 13:19:17 2013] Offset between fit and detection position for source 38 = 0.331379 pixels
[Wed Jun 19 13:19:17 2013] 126.374900 total counts/ 97.486200 bgd. counts: snr = 2.925879
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.331379 pixels
  Position = (208.1, 202.7) = 3 3 9.80 -0 0 26.7
  Extent = 6.0 (3.4-10.0)", rotation angle = 30 (10-52) degrees
  Source counts = 28.9 +/- 11.2
  Background counts = 97.5
  Rate = 0.0006 +/- 0.0002
[Wed Jun 19 13:19:17 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:17 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 13:19:17 2013] Source does appear to be extended
[Wed Jun 19 13:19:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Wed Jun 19 14:12:30 2013] XMMSAS src. selection expression = ellipse(18056.324400, 17588.320800, 361.090210, 168.139205, 30.392032, X, Y)
[Wed Jun 19 14:12:30 2013] Writing source region out to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38_src.reg
[Wed Jun 19 14:12:30 2013] Extracting stamp from image fullrun_mos1_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (187, 182) - (229, 223)
[Wed Jun 19 14:12:30 2013] XMMSAS bgd. selection expression = annulus(18056.324400, 17588.320800, 601.817017, 1203.634035, X, Y)
[Wed Jun 19 14:12:30 2013] Writing fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38.gif
[Wed Jun 19 14:21:25 2013] Mean detx,y = (-11123.34, -7395.72) 
[Wed Jun 19 14:21:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 14:21:42 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 14:21:42 2013] Setting source spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Jun 19 14:21:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Jun 19 14:41:18 2013] Not generating rmf since there are only 28 counts
[Wed Jun 19 14:41:18 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:17 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:17 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 32.00
[Wed Jun 19 15:12:17 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 132.00
[Wed Jun 19 15:12:17 2013] Got source and background scale factors 162032.000000, 2951358.000000
[Wed Jun 19 15:12:17 2013] User source parameters:
  Position = (208.1, 202.7) = 3 3 9.80 -0 0 26.7
  Extent = 6.0 (3.4-10.0)", rotation angle = 30 (10-52) degrees
  Source aperture counts = 24.8 +/- 6.7
  Background aperture counts = 7.2
  Rate = 0.0005 +/- 0.0001

[Wed Jun 19 15:12:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:19 2013] Using photon index=1.80, rate=0.000605, arf fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38.arf
[Wed Jun 19 15:12:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:19 2013] Updating source flux to 2e-14
[Wed Jun 19 15:12:27 2013] Source 38 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 15:12:30 2013] xmm0041170101/analysis//spectral/fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete