[Wed Jun 19 06:21:41 2013] Detection parameters:
  Position = (285.3, 504.5) = 3 2 47.40 0 21 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.9 +/- 8.7
  Background counts = 11.2
  Rate = 0.0008 +/- 0.0002

[Wed Jun 19 06:21:42 2013] Off-axis axis estimate = 14.97'
[Wed Jun 19 07:53:53 2013] Using EEF radius (= 13.91 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:53:53 2013] Initial guess for spatial extent in simple fitting = 13.91"
[Wed Jun 19 07:53:53 2013] source mask rpix=3.2, npix_max = 54, mask sum = 44, frac = 0.804
[Wed Jun 19 07:53:53 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 13.91"
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src42.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src42.csv
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src42.csv
[Wed Jun 19 08:58:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 08:58:28 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed Jun 19 08:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed Jun 19 08:58:28 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed Jun 19 08:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed Jun 19 08:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:38 2013] Warning, spatial fit 42 centroid is now closest to src. 4
[Wed Jun 19 10:00:38 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:38 2013] Assessing source extent using major
[Wed Jun 19 10:00:38 2013] Source does appear to be extended
[Wed Jun 19 10:00:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:21:51 2013] Using EEF radius (= 13.91 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:21:51 2013] Initial guess for spatial extent in simple fitting = 13.91"
[Wed Jun 19 11:21:51 2013] source mask rpix=3.2, npix_max = 54, mask sum = 44, frac = 0.804
[Wed Jun 19 11:21:51 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 13.91"
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src41.ximg exists
[Wed Jun 19 12:19:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src41.csv
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Jun 19 12:19:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src41.csv
[Wed Jun 19 12:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Jun 19 12:19:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Jun 19 12:19:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed Jun 19 12:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:19:17 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.482350 pixels away
[Wed Jun 19 13:19:17 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:17 2013] Assessing source extent using major
[Wed Jun 19 13:19:17 2013] Source does appear to be extended
[Wed Jun 19 13:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 14:12:30 2013] XMMSAS src. selection expression = ellipse(24774.975189, 43841.380432, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 14:12:30 2013] Writing source region out to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 19 14:12:30 2013] Extracting stamp from image fullrun_mos1_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (248, 467) - (323, 542)
[Wed Jun 19 14:12:30 2013] XMMSAS bgd. selection expression = annulus(24774.975189, 43841.380432, 1087.500000, 2175.000000, X, Y) && !ellipse(26855.524200, 43439.601600, 298.492809, 298.492809, 0.000000, X, Y)
[Wed Jun 19 14:12:30 2013] Writing fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3.gif
[Wed Jun 19 14:23:40 2013] Mean detx,y = (15799.35, -6052.86) 
[Wed Jun 19 14:23:41 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 14:24:01 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 14:24:01 2013] Setting source spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 19 14:24:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 19 14:42:18 2013] Not generating rmf since there are only 38 counts
[Wed Jun 19 14:42:18 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:18 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:18 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 71.00
[Wed Jun 19 15:12:18 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 220.00
[Wed Jun 19 15:12:19 2013] Got source and background scale factors 924264.000000, 4317553.000000
[Wed Jun 19 15:12:19 2013] User source parameters:
  Position = (285.3, 504.5) = 3 2 47.40 0 21 27.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 23.9 +/- 9.5
  Background aperture counts = 47.1
  Rate = 0.0005 +/- 0.0002

[Wed Jun 19 15:12:19 2013] Updating counts from extracted products
[Wed Jun 19 15:12:19 2013] Set source signif. to 23.90/6.86 = 3.48
[Wed Jun 19 15:12:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:19 2013] Using photon index=1.80, rate=0.000501, arf fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3.arf
[Wed Jun 19 15:12:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:19 2013] Updating source flux to 1.9e-14
[Wed Jun 19 15:12:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 15:12:30 2013] xmm0041170101/analysis//spectral/fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete