[Wed Jun 19 06:21:42 2013] Detection parameters:
  Position = (317.2, 237.3) = 3 2 38.16 0 2 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.7 +/- 15.0
  Background counts = 18.8
  Rate = 0.004 +/- 0.0004

[Wed Jun 19 06:21:42 2013] Off-axis axis estimate = 4.63'
[Wed Jun 19 07:53:53 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:53:53 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed Jun 19 07:53:53 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.833
[Wed Jun 19 07:53:53 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.75"
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src8.csv
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src8.csv
[Wed Jun 19 08:58:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 19 08:58:27 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jun 19 08:58:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 19 08:58:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:38 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.772701 pixels away
[Wed Jun 19 10:00:38 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:38 2013] Assessing source extent using major
[Wed Jun 19 10:00:38 2013] Source does appear to be extended
[Wed Jun 19 10:00:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:21:51 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:21:51 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed Jun 19 11:21:51 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.833
[Wed Jun 19 11:21:51 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.75"
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jun 19 12:19:24 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jun 19 12:19:24 2013] Fit fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_src7 appears to have run properly
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jun 19 12:19:25 2013] fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jun 19 12:19:25 2013] Fit fullrun_mos1_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jun 19 13:19:17 2013] Spatial fit model total counts = 229.474000, observed total counts = 220.000000
[Wed Jun 19 13:19:17 2013] Offset between fit and detection position for source 29 = 0.055905 pixels
[Wed Jun 19 13:19:17 2013] 225.766100 total counts/ 138.863000 bgd. counts: snr = 7.374660
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.055905 pixels
  Position = (317.2, 237.4) = 3 2 38.17 0 2 4.1
  Extent = 5.7 (4.5-7.4)" x 3.6 (2.7-5.2)", rotation angle = 0 (334-28) degrees
  Source counts = 86.9 +/- 15.0
  Background counts = 138.9
  Rate = 0.002 +/- 0.0003
[Wed Jun 19 13:19:17 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:17 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 13:19:17 2013] Source does appear to be extended
[Wed Jun 19 13:19:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.87
[Wed Jun 19 14:12:30 2013] XMMSAS src. selection expression = ellipse(27545.874520, 20603.294200, 339.347410, 213.885606, 0.200507, X, Y)
[Wed Jun 19 14:12:30 2013] Writing source region out to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29_src.reg
[Wed Jun 19 14:12:30 2013] Extracting stamp from image fullrun_mos1_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (298, 218) - (337, 257)
[Wed Jun 19 14:12:30 2013] XMMSAS bgd. selection expression = annulus(27545.874520, 20603.294200, 565.579016, 1131.158033, X, Y) && !ellipse(28543.560200, 19475.997000, 380.484811, 380.484811, 0.000000, X, Y) && !ellipse(25619.664795, 20208.490738, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 14:12:30 2013] Writing fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29.gif
[Wed Jun 19 14:14:14 2013] Mean detx,y = (-6283.24, 1290.07) 
[Wed Jun 19 14:14:16 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 14:14:29 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 14:14:29 2013] Setting source spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jun 19 14:14:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jun 19 14:35:17 2013] Not generating rmf since there are only 86 counts
[Wed Jun 19 14:35:17 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:14 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:14 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 103.00
[Wed Jun 19 15:12:14 2013] Total counts from fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 177.00
[Wed Jun 19 15:12:14 2013] Got source and background scale factors 225600.000000, 2689534.000000
[Wed Jun 19 15:12:14 2013] User source parameters:
  Position = (317.2, 237.4) = 3 2 38.17 0 2 4.1
  Extent = 5.7 (4.5-7.4)" x 3.6 (2.7-5.2)", rotation angle = 0 (334-28) degrees
  Source aperture counts = 88.2 +/- 11.2
  Background aperture counts = 14.8
  Rate = 0.002 +/- 0.0002

[Wed Jun 19 15:12:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:19 2013] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29.arf
[Wed Jun 19 15:12:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:19 2013] Updating source flux to 3.1e-14
[Wed Jun 19 15:12:27 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 15:12:30 2013] xmm0041170101/analysis//spectral/fullrun_mos1_xmm0041170101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete