[Sat May  4 01:44:17 2013] Detection parameters:
  Position = (267.0, 191.2) = 17 28 25.97 -14 22 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.7 +/- 11.3
  Background counts = 16.0
  Rate = 0.003 +/- 0.0005

[Sat May  4 01:44:18 2013] Off-axis axis estimate = 8.10'
[Sat May  4 02:29:24 2013] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Sat May  4 02:29:24 2013] Initial guess for spatial extent in simple fitting = 10.48"
[Sat May  4 02:29:24 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.064
[Sat May  4 02:29:24 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 10.48"
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src12.ximg exists
[Sat May  4 03:57:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src12.csv
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat May  4 03:57:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src12.csv
[Sat May  4 03:57:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat May  4 03:57:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat May  4 03:57:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May  4 03:57:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:57:37 2013] Spatial fit model total counts = 221.372000, observed total counts = 195.000000
[Sat May  4 03:57:37 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 03:57:37 2013] Vigneting correction estimate = 1.000000
[Sat May  4 03:57:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 03:57:37 2013] Assessing source extent using major
[Sat May  4 03:57:37 2013] Source does appear to be extended
[Sat May  4 03:57:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 03:57:37 2013] Deleting source due to low Poisson probability 0.9