[Sat May  4 01:44:17 2013] Detection parameters:
  Position = (334.2, 205.3) = 17 28 5.86 -14 21 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.0 +/- 9.6
  Background counts = 13.6
  Rate = 0.002 +/- 0.0004

[Sat May  4 01:44:18 2013] Off-axis axis estimate = 7.23'
[Sat May  4 02:29:24 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Sat May  4 02:29:24 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Sat May  4 02:29:24 2013] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.045
[Sat May  4 02:29:24 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.05"
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src14.ximg exists
[Sat May  4 03:57:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src14.csv
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May  4 03:57:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src14.csv
[Sat May  4 03:57:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May  4 03:57:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May  4 03:57:27 2013] fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May  4 03:57:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May  4 03:57:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:57:37 2013] Spatial fit model total counts = -615.469000, observed total counts = 131.000000
[Sat May  4 03:57:37 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 03:57:37 2013] Vigneting correction estimate = 1.000000
[Sat May  4 03:57:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 03:57:37 2013] Assessing source extent using major
[Sat May  4 03:57:37 2013] Source does appear to be extended
[Sat May  4 03:57:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 03:57:37 2013] Deleting source due to low Poisson probability 0.9