[Sat May  4 01:43:51 2013] Detection parameters:
  Position = (204.0, 362.4) = 17 28 44.80 -14 9 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.1 +/- 9.2
  Background counts = 12.1
  Rate = 0.002 +/- 0.0004

[Sat May  4 01:43:51 2013] Off-axis axis estimate = 8.27'
[Sat May  4 01:46:26 2013] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Sat May  4 01:46:26 2013] Initial guess for spatial extent in simple fitting = 10.56"
[Sat May  4 01:46:26 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.875
[Sat May  4 01:46:26 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.56"
[Sat May  4 02:29:23 2013] fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_src13.ximg exists
[Sat May  4 02:29:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_src13.csv
[Sat May  4 02:29:23 2013] fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat May  4 02:29:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_src13.csv
[Sat May  4 02:29:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 02:29:24 2013] fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat May  4 02:29:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May  4 02:29:24 2013] fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat May  4 02:29:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May  4 02:29:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041160101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:57:33 2013] Source 16 is offset by 2.978137 and 9.093375 pixels which is larger than
2 X fitted extent = 1.214129 x 1.214129, not incorporating fit results
[Sat May  4 03:57:33 2013] Vigneting correction estimate = 1.000000
[Sat May  4 03:57:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 03:57:33 2013] Assessing source extent using major
[Sat May  4 03:57:33 2013] Source does appear to be extended
[Sat May  4 03:57:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 03:57:33 2013] Deleting source due to low Poisson probability 0.9