[Wed Jun 27 03:49:20 2012] Detection parameters:
  Position = (381.8, 269.4) = 21 3 40.99 -11 22 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 12.0
  Background counts = 22.9
  Rate = 0.003 +/- 0.0005

[Wed Jun 27 03:49:21 2012] Off-axis axis estimate = 6.40'
[Wed Jun 27 04:35:00 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 04:35:00 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Wed Jun 27 04:35:00 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.849
[Wed Jun 27 04:35:00 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.63"
[Wed Jun 27 04:59:25 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 27 04:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 27 04:59:25 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 27 04:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 27 04:59:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 04:59:25 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 27 04:59:25 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 27 04:59:25 2012] Fit fullrun_mos2_xmm0041150101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jun 27 04:59:37 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.246272 pixels away
[Wed Jun 27 04:59:37 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 04:59:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 04:59:37 2012] Assessing source extent using major
[Wed Jun 27 04:59:37 2012] Source does appear to be extended
[Wed Jun 27 04:59:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 05:43:00 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 05:43:00 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Wed Jun 27 05:43:00 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.849
[Wed Jun 27 05:43:00 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.63"
[Wed Jun 27 06:04:20 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jun 27 06:04:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_src11.csv
[Wed Jun 27 06:04:20 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jun 27 06:04:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_src11.csv
[Wed Jun 27 06:04:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:04:20 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jun 27 06:04:20 2012] fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jun 27 06:04:20 2012] Fit fullrun_mos2_xmm0041150101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jun 27 06:04:32 2012] Spatial fit model total counts = 322.999000, observed total counts = 323.000000
[Wed Jun 27 06:04:32 2012] Offset between fit and detection position for source 14 = 0.200821 pixels
[Wed Jun 27 06:04:32 2012] 323.242300 total counts/ 281.874000 bgd. counts: snr = 2.463997
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.200821 pixels
  Position = (382.0, 269.4) = 21 3 40.93 -11 22 47.9
  Extent = 5.4 (2.6-7.9)", rotation angle = 0
  Source counts = 41.4 +/- 18.0
  Background counts = 281.9
  Rate = 0.001 +/- 0.0005
[Wed Jun 27 06:04:32 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 06:04:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 06:04:32 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 06:04:32 2012] Source does appear to be extended
[Wed Jun 27 06:04:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 07:03:47 2012] XMMSAS src. selection expression = ellipse(33182.964020, 23387.984800, 321.000609, 321.000609, 0.000000, X, Y)
[Wed Jun 27 07:03:47 2012] Writing source region out to fullrun_mos2_xmm0041150101_pi300-10000_pass1_cl_src14_src.reg
[Wed Jun 27 07:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0041150101_pi300-10000_cl_sm2.00.img.gz, (364, 251) - (400, 288)
[Wed Jun 27 07:03:47 2012] XMMSAS bgd. selection expression = annulus(33182.964020, 23387.984800, 535.001015, 1070.002031, X, Y)
[Wed Jun 27 07:03:47 2012] Writing fullrun_mos2_xmm0041150101_pi300-10000_pass1_cl_src14.gif
[Wed Jun 27 07:06:08 2012] Mean detx,y = (8861.77, -1037.74) 
[Wed Jun 27 07:06:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 07:06:16 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 07:06:16 2012] Setting source spectrum file to fullrun_mos2_xmm0041150101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 27 07:06:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041150101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jun 27 07:22:59 2012] Not generating rmf since there are only 41 counts
[Wed Jun 27 07:22:59 2012] rmf not generated due to insufficient counts
[Wed Jun 27 07:24:26 2012] Updating aperture counts using extracted products
[Wed Jun 27 07:24:26 2012] Error reading totcts from fullrun_mos2_xmm0041150101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 27 07:24:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 07:24:26 2012] Using photon index=1.80, rate=0.00104, arf fullrun_mos2_xmm0041150101_pi300-10000_pass1_cl_src14.arf
[Wed Jun 27 07:24:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 07:24:26 2012] Updating source flux to 2.1e-14
[Wed Jun 27 07:24:54 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting