[Sun Aug 26 15:14:33 2012] Detection parameters:
  Position = (372.7, 334.5) = 0 42 22.41 64 48 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.7 +/- 5.6
  Background counts = 2.6
  Rate = 0.003 +/- 0.0009

[Sun Aug 26 15:14:33 2012] Off-axis axis estimate = 5.98'
[Sun Aug 26 15:32:36 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 15:32:36 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sun Aug 26 15:32:36 2012] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.809
[Sun Aug 26 15:32:36 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.42"
[Sun Aug 26 15:38:04 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_src3.ximg exists
[Sun Aug 26 15:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_src3.csv
[Sun Aug 26 15:38:04 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Aug 26 15:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_src3.csv
[Sun Aug 26 15:38:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 15:38:04 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Aug 26 15:38:04 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Aug 26 15:38:04 2012] Fit fullrun_mos2_xmm0040140301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Aug 26 15:38:08 2012] Spatial fit model total counts = 41.843600, observed total counts = 39.000000
[Sun Aug 26 15:38:08 2012] Offset between fit and detection position for source 4 = 0.323956 pixels
[Sun Aug 26 15:38:08 2012] 40.695400 total counts/ 30.650400 bgd. counts: snr = 1.814395
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.323956 pixels
  Position = (372.4, 334.7) = 0 42 22.58 64 48 23.5
  Extent = 2.4" x 2.4", rotation angle = 0
  Source counts = 10.0 +/- 6.4
  Background counts = 30.7
  Rate = 0.001 +/- 0.0007
[Sun Aug 26 15:38:08 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 15:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 15:38:08 2012] Assessing source extent using major
[Sun Aug 26 15:38:08 2012] Source does appear to be extended
[Sun Aug 26 15:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 15:48:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 15:48:27 2012] Initial guess for spatial extent in simple fitting = 2.36"
[Sun Aug 26 15:48:27 2012] source mask rpix=0.5, npix_max = 4, mask sum = 4, frac = 0.922
[Sun Aug 26 15:48:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 2.36"
[Sun Aug 26 15:53:22 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_src3.ximg exists
[Sun Aug 26 15:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_src3.csv
[Sun Aug 26 15:53:22 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Aug 26 15:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_src3.csv
[Sun Aug 26 15:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 15:53:22 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Aug 26 15:53:22 2012] fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Aug 26 15:53:22 2012] Fit fullrun_mos2_xmm0040140301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Aug 26 15:53:25 2012] Spatial fit model total counts = 43.289000, observed total counts = 40.000000
[Sun Aug 26 15:53:25 2012] Offset between fit and detection position for source 4 = 0.206347 pixels
[Sun Aug 26 15:53:25 2012] 41.682410 total counts/ 32.289700 bgd. counts: snr = 1.652947
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.206347 pixels
  Position = (372.5, 334.5) = 0 42 22.53 64 48 22.6
  Extent = 0.7 (0.7-0.7)", rotation angle = 0
  Source counts = 9.4 +/- 6.5
  Background counts = 32.3
  Rate = 0.001 +/- 0.0007
  Deleting source due to low Poisson probability