[Fri Jun 29 10:31:20 2012] Detection parameters:
  Position = (450.2, 259.0) = 15 32 2.36 30 16 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10840.6 +/- 121.4
  Background counts = 28.7
  Rate = 0.7 +/- 0.008

[Fri Jun 29 10:31:21 2012] Off-axis axis estimate = 11.37'
[Fri Jun 29 10:35:11 2012] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 10:35:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 29 10:35:11 2012] Initial guess for spatial extent in simple fitting = 12.11"
[Fri Jun 29 10:35:11 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.834
[Fri Jun 29 10:35:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.11"
[Fri Jun 29 11:38:30 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 29 11:38:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 29 11:38:30 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 29 11:38:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 29 11:38:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 11:38:31 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 29 11:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 29 11:38:31 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 29 11:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 29 11:38:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0039340101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 13:38:45 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.635726 pixels away
[Fri Jun 29 13:38:45 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 13:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 13:38:45 2012] Assessing source extent using major
[Fri Jun 29 13:38:45 2012] Source does appear to be extended
[Fri Jun 29 13:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 13:39:04 2012] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 13:39:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 29 13:39:04 2012] Initial guess for spatial extent in simple fitting = 12.11"
[Fri Jun 29 13:39:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.834
[Fri Jun 29 13:39:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.11"
[Fri Jun 29 14:29:41 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 29 14:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 29 14:29:41 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 29 14:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 29 14:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 14:29:41 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 29 14:29:41 2012] fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 29 14:29:41 2012] Fit fullrun_pn_xmm0039340101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 29 15:34:43 2012] Spatial fit model total counts = 9152.250000, observed total counts = 9010.000000
[Fri Jun 29 15:34:43 2012] Offset between fit and detection position for source 1 = 0.242373 pixels
[Fri Jun 29 15:34:43 2012] 9143.840000 total counts/ 1841.100000 bgd. counts: snr = 170.195138
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.242373 pixels
  Position = (450.0, 259.2) = 15 32 2.43 30 16 26.9
  Extent = 7.6 (7.5-7.8)", rotation angle = 0
  Source counts = 7302.7 +/- 95.6
  Background counts = 1841.1
  Rate = 0.7 +/- 0.009
[Fri Jun 29 15:34:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 15:34:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 15:34:43 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 15:34:43 2012] Source does appear to be extended
[Fri Jun 29 15:34:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 15:34:51 2012] Counts = 7302.740000, rescaling region sizes by 2.000000
[Fri Jun 29 15:34:51 2012] XMMSAS src. selection expression = ellipse(39101.458600, 22498.111600, 913.821626, 913.821626, 0.000000, X, Y)
[Fri Jun 29 15:34:51 2012] Writing source region out to fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 29 15:34:51 2012] Extracting stamp from image fullrun_pn_xmm0039340101_pi300-10000_cl_sm2.00.img.gz, (397, 207) - (503, 312)
[Fri Jun 29 15:34:51 2012] XMMSAS bgd. selection expression = annulus(39101.458600, 22498.111600, 3046.072088, 6092.144175, X, Y) && !ellipse(34687.609375, 28587.727356, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 29 15:34:51 2012] Writing fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 29 15:34:59 2012] Mean detx,y = (6958.37, 12472.51) 
[Fri Jun 29 15:35:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 15:36:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 15:36:05 2012] Setting source spectrum file to fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 29 15:36:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 29 17:16:41 2012] Updating aperture counts using extracted products
[Fri Jun 29 17:16:41 2012] Error reading totcts from fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 29 17:16:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 17:16:41 2012] Using photon index=1.80, rate=0.676, arf fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 29 17:16:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 17:16:41 2012] Updating source flux to 3.9e-12
[Fri Jun 29 17:17:50 2012] Reading fit data from xmm0039340101/analysis//spectral/fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 29 17:17:50 2012] Spectral fit parameter nH value = 5.23378e+20
[Fri Jun 29 17:17:50 2012] Spectral fit parameter PhoIndex value = 2.61095
[Fri Jun 29 17:17:50 2012] Failed to get F(0.3-8.0) from xmm0039340101/analysis//spectral/fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 29 17:17:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 17:17:50 2012] Using Nh = 5.2e+20, photon index=2.61, rate=0.676, arf fullrun_pn_xmm0039340101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 29 17:17:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 17:17:50 2012] Updating source flux to 2.8e-12