[Sun Jul 22 16:40:44 2012] Detection parameters:
  Position = (433.6, 399.1) = 15 31 59.04 32 48 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 521.4 +/- 29.8
  Background counts = 57.8
  Rate = 0.04 +/- 0.002

[Sun Jul 22 16:40:44 2012] Off-axis axis estimate = 12.22'
[Sun Jul 22 16:56:22 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 16:56:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 16:56:22 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Sun Jul 22 16:56:22 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071
[Sun Jul 22 16:56:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.54"
[Sun Jul 22 17:04:45 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 17:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 17:04:45 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 17:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 17:04:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 17:04:45 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 17:04:45 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 17:04:45 2012] Fit fullrun_mos1_xmm0039140101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 22 17:11:33 2012] Spatial fit model total counts = 447.806000, observed total counts = 449.000000
[Sun Jul 22 17:11:33 2012] Offset between fit and detection position for source 3 = 0.301560 pixels
[Sun Jul 22 17:11:33 2012] 448.945000 total counts/ 238.912000 bgd. counts: snr = 13.588407
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.301560 pixels
  Position = (433.3, 399.2) = 15 31 59.14 32 48 25.8
  Extent = 6.2 (5.6-7.1)", rotation angle = 0
  Source counts = 210.0 +/- 21.2
  Background counts = 238.9
  Rate = 0.02 +/- 0.002
[Sun Jul 22 17:11:33 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 17:11:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 17:11:33 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 17:11:33 2012] Source does appear to be extended
[Sun Jul 22 17:11:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 17:27:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 22 17:27:04 2012] Initial guess for spatial extent in simple fitting = 6.23"
[Sun Jul 22 17:27:04 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.071
[Sun Jul 22 17:27:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.23"
[Sun Jul 22 17:36:14 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 22 17:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 17:36:14 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 22 17:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 17:36:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 17:36:14 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 22 17:36:14 2012] fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 22 17:36:14 2012] Fit fullrun_mos1_xmm0039140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 22 17:43:17 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Sun Jul 22 17:43:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 17:43:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 17:43:17 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 17:43:17 2012] Source does appear to be extended
[Sun Jul 22 17:43:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 17:54:09 2012] XMMSAS src. selection expression = ellipse(37645.468400, 34678.451600, 373.983611, 373.983611, 0.000000, X, Y)
[Sun Jul 22 17:54:09 2012] Writing source region out to fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3_src.reg
[Sun Jul 22 17:54:09 2012] Extracting stamp from image fullrun_mos1_xmm0039140101_pi300-10000_cl_sm2.00.img.gz, (412, 378) - (455, 421)
[Sun Jul 22 17:54:09 2012] XMMSAS bgd. selection expression = annulus(37645.468400, 34678.451600, 623.306018, 1246.612036, X, Y)
[Sun Jul 22 17:54:09 2012] Writing fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3.gif
[Sun Jul 22 17:54:11 2012] Mean detx,y = (2035.04, 12864.95) 
[Sun Jul 22 17:54:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 17:54:19 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 17:54:19 2012] Setting source spectrum file to fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 17:54:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jul 22 18:08:29 2012] Updating aperture counts using extracted products
[Sun Jul 22 18:08:29 2012] Error reading totcts from fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 18:08:29 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 18:08:29 2012] Using photon index=1.80, rate=0.0168, arf fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3.arf
[Sun Jul 22 18:08:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 18:08:29 2012] Updating source flux to 3.7e-13
[Sun Jul 22 18:08:53 2012] Reading fit data from xmm0039140101/analysis//spectral/fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jul 22 18:08:53 2012] Spectral fit parameter nH value = 8.01629e+21
[Sun Jul 22 18:08:53 2012] Spectral fit parameter PhoIndex value = 7.86224
[Sun Jul 22 18:08:53 2012] Failed to get F(0.3-8.0) from xmm0039140101/analysis//spectral/fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jul 22 18:08:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 18:08:53 2012] Using Nh = 8e+21, photon index=7.86, rate=0.0168, arf fullrun_mos1_xmm0039140101_pi300-10000_pass1_cl_src3.arf
[Sun Jul 22 18:08:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 18:08:53 2012] Updating source flux to 2.1e-13