[Thu Jul 19 10:36:47 2012] Detection parameters:
  Position = (313.7, 304.2) = 10 40 23.30 9 12 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.6 +/- 21.0
  Background counts = 219.0
  Rate = 0.02 +/- 0.003

[Thu Jul 19 10:36:47 2012] Off-axis axis estimate = 1.18'
[Thu Jul 19 10:41:22 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 10:41:22 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Thu Jul 19 10:41:22 2012] source mask rpix=1.6, npix_max = 17, mask sum = 9, frac = 0.504
[Thu Jul 19 10:41:22 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.02"
[Thu Jul 19 14:43:02 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src53.ximg exists
[Thu Jul 19 14:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src53.csv
[Thu Jul 19 14:43:02 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src53_1.ximg exists
[Thu Jul 19 14:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src53.csv
[Thu Jul 19 14:43:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 14:43:04 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Thu Jul 19 14:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Jul 19 14:43:04 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Thu Jul 19 14:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Jul 19 14:43:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 14:48:39 2012] Source 56 is offset by -1.302407 and 1.318473 pixels which is larger than
2 X fitted extent = 1.303168 x 1.303168, not incorporating fit results
[Thu Jul 19 14:48:39 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 14:48:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 14:48:39 2012] Assessing source extent using major
[Thu Jul 19 14:48:39 2012] Source does appear to be extended
[Thu Jul 19 14:48:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 14:48:39 2012] Source is confused with source 53
[Thu Jul 19 14:48:48 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 14:48:48 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Thu Jul 19 14:48:48 2012] source mask rpix=1.6, npix_max = 17, mask sum = 9, frac = 0.504
[Thu Jul 19 14:48:48 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 7.02"
[Thu Jul 19 18:29:39 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src51.ximg exists
[Thu Jul 19 18:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src51.csv
[Thu Jul 19 18:29:39 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu Jul 19 18:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src51.csv
[Thu Jul 19 18:29:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:29:41 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu Jul 19 18:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu Jul 19 18:29:41 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Jul 19 18:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu Jul 19 18:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:34:14 2012] Source 56 is offset by -1.308561 and 1.320721 pixels which is larger than
2 X fitted extent = 1.305674 x 1.305674, not incorporating fit results
[Thu Jul 19 18:34:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:34:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:34:14 2012] Assessing source extent using major
[Thu Jul 19 18:34:14 2012] Source does appear to be extended
[Thu Jul 19 18:34:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:34:25 2012] XMMSAS src. selection expression = ellipse(27245.511810, 26413.324738, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 18:34:25 2012] Writing source region out to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src56_src.reg
[Thu Jul 19 18:34:25 2012] Extracting stamp from image fullrun_pn_xmm0038540401_pi300-10000_cl_sm2.00.img.gz, (276, 267) - (351, 342)
[Thu Jul 19 18:34:25 2012] XMMSAS bgd. selection expression = annulus(27245.511810, 26413.324738, 1087.500000, 2175.000000, X, Y) && !ellipse(28583.872253, 24755.452759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29085.598450, 24870.731476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.337616, 28930.085419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26218.575684, 28861.569733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26741.271301, 28184.614258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.402283, 27876.038788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26803.866272, 27515.273407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.263397, 25261.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.813629, 26993.307922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30007.180359, 25265.738770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29569.352753, 26124.754913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.169647, 26144.338409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29438.037659, 25713.084656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27728.424469, 25447.265778, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 18:34:25 2012] Writing fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src56.gif
[Thu Jul 19 18:57:13 2012] Mean detx,y = (-2618.19, 1387.08) 
[Thu Jul 19 18:57:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 18:57:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 18:57:34 2012] Setting source spectrum file to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Jul 19 18:57:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Thu Jul 19 19:15:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 19:15:29 2012] rmf not generated due to insufficient counts
[Thu Jul 19 19:18:16 2012] Updating aperture counts using extracted products
[Thu Jul 19 19:18:16 2012] Error reading totcts from fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Jul 19 19:18:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 19:18:17 2012] Using photon index=1.80, rate=0.0169, arf fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src56.arf
[Thu Jul 19 19:18:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 19:18:17 2012] Updating source flux to 6.8e-14
[Thu Jul 19 19:18:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 19 19:18:54 2012] xmm0038540401/analysis//spectral/fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete