[Thu Jul 19 10:36:47 2012] Detection parameters:
  Position = (345.5, 291.0) = 10 40 13.97 9 11 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.4 +/- 19.8
  Background counts = 222.3
  Rate = 0.01 +/- 0.001

[Thu Jul 19 10:36:47 2012] Off-axis axis estimate = 3.45'
[Thu Jul 19 10:41:22 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 10:41:22 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Thu Jul 19 10:41:22 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.709
[Thu Jul 19 10:41:22 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 8.15"
[Thu Jul 19 14:43:02 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src52.ximg exists
[Thu Jul 19 14:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src52.csv
[Thu Jul 19 14:43:02 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src52_1.ximg exists
[Thu Jul 19 14:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src52.csv
[Thu Jul 19 14:43:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 14:43:04 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Thu Jul 19 14:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu Jul 19 14:43:04 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Thu Jul 19 14:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu Jul 19 14:43:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 14:48:39 2012] Spatial fit model total counts = 688.946000, observed total counts = 571.000000
[Thu Jul 19 14:48:39 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 14:48:39 2012] Spatial fit model total counts = 856.958000, observed total counts = 703.000000
[Thu Jul 19 14:48:39 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 14:48:39 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 14:48:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 14:48:39 2012] Assessing source extent using major
[Thu Jul 19 14:48:39 2012] Source does appear to be extended
[Thu Jul 19 14:48:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 14:48:48 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 14:48:48 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Thu Jul 19 14:48:48 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.709
[Thu Jul 19 14:48:48 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 8.15"
[Thu Jul 19 18:29:39 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src50.ximg exists
[Thu Jul 19 18:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src50.csv
[Thu Jul 19 18:29:39 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src50_1.ximg exists
[Thu Jul 19 18:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src50.csv
[Thu Jul 19 18:29:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:29:41 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Thu Jul 19 18:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src50.csv
[Thu Jul 19 18:29:41 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Thu Jul 19 18:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src50.csv
[Thu Jul 19 18:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:34:14 2012] Spatial fit model total counts = 674.951000, observed total counts = 571.000000
[Thu Jul 19 18:34:14 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 18:34:14 2012] Source 55 is offset by 1.045360 and 1.118630 pixels which is larger than
2 X fitted extent = 4.001292 x 0.932818, not incorporating fit results
[Thu Jul 19 18:34:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:34:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:34:14 2012] Assessing source extent using major
[Thu Jul 19 18:34:14 2012] Source does appear to be extended
[Thu Jul 19 18:34:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:34:25 2012] XMMSAS src. selection expression = ellipse(30007.180359, 25265.738770, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 18:34:25 2012] Writing source region out to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src55_src.reg
[Thu Jul 19 18:34:25 2012] Extracting stamp from image fullrun_pn_xmm0038540401_pi300-10000_cl_sm2.00.img.gz, (308, 253) - (383, 328)
[Thu Jul 19 18:34:25 2012] XMMSAS bgd. selection expression = annulus(30007.180359, 25265.738770, 1087.500000, 2175.000000, X, Y) && !ellipse(28583.872253, 24755.452759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29085.598450, 24870.731476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.402283, 27876.038788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.263397, 25261.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.813629, 26993.307922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.982361, 26721.748871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27245.511810, 26413.324738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29569.352753, 26124.754913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31421.822449, 26058.092438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.169647, 26144.338409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30957.768463, 25791.739899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29438.037659, 25713.084656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27728.424469, 25447.265778, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 18:34:25 2012] Writing fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src55.gif
[Thu Jul 19 18:56:46 2012] Mean detx,y = (-4538.32, -644.95) 
[Thu Jul 19 18:56:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 18:57:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 18:57:07 2012] Setting source spectrum file to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Jul 19 18:57:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Thu Jul 19 19:15:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 19:15:14 2012] rmf not generated due to insufficient counts
[Thu Jul 19 19:18:16 2012] Updating aperture counts using extracted products
[Thu Jul 19 19:18:16 2012] Error reading totcts from fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Jul 19 19:18:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 19:18:17 2012] Using photon index=1.80, rate=0.0134, arf fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src55.arf
[Thu Jul 19 19:18:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 19:18:17 2012] Updating source flux to 5.2e-14
[Thu Jul 19 19:18:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 19 19:18:54 2012] xmm0038540401/analysis//spectral/fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete