[Thu Jul 19 10:36:45 2012] Detection parameters:
  Position = (287.9, 372.0) = 10 40 30.89 9 17 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.9 +/- 23.9
  Background counts = 192.1
  Rate = 0.02 +/- 0.003

[Thu Jul 19 10:36:47 2012] Off-axis axis estimate = 5.39'
[Thu Jul 19 10:41:22 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 10:41:22 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu Jul 19 10:41:22 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.112
[Thu Jul 19 10:41:22 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.12"
[Thu Jul 19 14:43:02 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jul 19 14:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src33.csv
[Thu Jul 19 14:43:02 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jul 19 14:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src33.csv
[Thu Jul 19 14:43:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 14:43:04 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jul 19 14:43:04 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jul 19 14:43:04 2012] Fit fullrun_pn_xmm0038540401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Jul 19 14:48:39 2012] Warning, spatial fit 33 centroid is now closest to src. 33
[Thu Jul 19 14:48:39 2012] Source 35 is offset by -1.068329 and -1.416782 pixels which is larger than
2 X fitted extent = 1.021775 x 1.021775, not incorporating fit results
[Thu Jul 19 14:48:39 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 14:48:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 14:48:39 2012] Assessing source extent using major
[Thu Jul 19 14:48:39 2012] Source does appear to be extended
[Thu Jul 19 14:48:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 14:48:39 2012] Source is confused with source 32
[Thu Jul 19 14:48:48 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 14:48:48 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu Jul 19 14:48:48 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.112
[Thu Jul 19 14:48:48 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 9.12"
[Thu Jul 19 18:29:39 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jul 19 18:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src31.csv
[Thu Jul 19 18:29:39 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jul 19 18:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src31.csv
[Thu Jul 19 18:29:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:29:40 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jul 19 18:29:40 2012] fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jul 19 18:29:40 2012] Fit fullrun_pn_xmm0038540401_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Jul 19 18:34:14 2012] Spatial fit model total counts = 740.936000, observed total counts = 662.000000
[Thu Jul 19 18:34:14 2012] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 18:34:14 2012] Warning, spatial fit 31 centroid is now closest to src. 38
[Thu Jul 19 18:34:14 2012] Source 35 is offset by -1.073777 and -1.420001 pixels which is larger than
2 X fitted extent = 1.021775 x 1.021775, not incorporating fit results
[Thu Jul 19 18:34:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:34:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:34:14 2012] Assessing source extent using major
[Thu Jul 19 18:34:14 2012] Source does appear to be extended
[Thu Jul 19 18:34:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:34:24 2012] XMMSAS src. selection expression = ellipse(24996.083374, 32318.401947, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 18:34:24 2012] Writing source region out to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src35_src.reg
[Thu Jul 19 18:34:24 2012] Extracting stamp from image fullrun_pn_xmm0038540401_pi300-10000_cl_sm2.00.img.gz, (250, 335) - (325, 410)
[Thu Jul 19 18:34:24 2012] XMMSAS bgd. selection expression = annulus(24996.083374, 32318.401947, 1087.500000, 2175.000000, X, Y) && !ellipse(23558.600067, 34422.754272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24427.986755, 34910.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24950.722198, 34298.498901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24140.858612, 33815.833160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24824.881775, 32666.654175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.272000, 32782.616000, 1459.808042, 1459.808042, 0.000000, X, Y) && !ellipse(25353.683960, 31794.769104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25585.696350, 31102.114441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.125366, 30492.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25318.438446, 30615.747589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.245697, 30260.517944, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 18:34:24 2012] Writing fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src35.gif
[Thu Jul 19 18:48:52 2012] Mean detx,y = (-2871.63, 7693.46) 
[Thu Jul 19 18:48:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 18:49:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 18:49:08 2012] Setting source spectrum file to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jul 19 18:49:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Jul 19 19:12:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 19:12:01 2012] rmf not generated due to insufficient counts
[Thu Jul 19 19:18:16 2012] Updating aperture counts using extracted products
[Thu Jul 19 19:18:16 2012] Error reading totcts from fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jul 19 19:18:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 19:18:17 2012] Using photon index=1.80, rate=0.0195, arf fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src35.arf
[Thu Jul 19 19:18:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 19:18:17 2012] Updating source flux to 7.5e-14
[Thu Jul 19 19:18:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 19 19:18:54 2012] xmm0038540401/analysis//spectral/fullrun_pn_xmm0038540401_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete