[Mon Aug 13 14:49:50 2012] Detection parameters:
  Position = (282.7, 281.9) = 21 4 39.45 -12 20 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 318.2 +/- 21.9
  Background counts = 6.7
  Rate = 0.02 +/- 0.002

[Mon Aug 13 14:49:50 2012] Off-axis axis estimate = 1.65'
[Mon Aug 13 16:27:12 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 16:27:12 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Aug 13 16:27:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Mon Aug 13 16:27:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Aug 13 17:02:35 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 13 17:02:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 17:02:35 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 13 17:02:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 17:02:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 17:02:35 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 13 17:02:35 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 13 17:02:35 2012] Fit fullrun_mos2_xmm0038540301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 13 17:02:57 2012] Spatial fit model total counts = 533.878000, observed total counts = 526.000000
[Mon Aug 13 17:02:57 2012] Offset between fit and detection position for source 1 = 0.051476 pixels
[Mon Aug 13 17:02:57 2012] 535.726000 total counts/ 256.203000 bgd. counts: snr = 17.463265
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.051476 pixels
  Position = (282.8, 282.0) = 21 4 39.44 -12 20 17.2
  Extent = 9.4 (7.9-11.1)", rotation angle = 0
  Source counts = 279.5 +/- 23.1
  Background counts = 256.2
  Rate = 0.02 +/- 0.002
[Mon Aug 13 17:02:57 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 17:02:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 17:02:57 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 17:02:57 2012] Source does appear to be extended
[Mon Aug 13 17:02:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 18:40:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 18:40:35 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Mon Aug 13 18:40:35 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.060
[Mon Aug 13 18:40:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.40"
[Mon Aug 13 19:10:43 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 13 19:10:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 19:10:43 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 13 19:10:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 19:10:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 19:10:43 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 13 19:10:43 2012] fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 13 19:10:43 2012] Fit fullrun_mos2_xmm0038540301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 13 19:11:02 2012] Spatial fit model total counts = 554.734000, observed total counts = 544.000000
[Mon Aug 13 19:11:02 2012] Offset between fit and detection position for source 1 = 0.052740 pixels
[Mon Aug 13 19:11:02 2012] 559.374000 total counts/ 268.635000 bgd. counts: snr = 17.738708
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.052740 pixels
  Position = (282.7, 282.0) = 21 4 39.46 -12 20 17.2
  Extent = 9.7 (8.2-11.5)", rotation angle = 0
  Source counts = 290.7 +/- 23.7
  Background counts = 268.6
  Rate = 0.02 +/- 0.002
[Mon Aug 13 19:11:02 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 19:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 19:11:02 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 19:11:02 2012] Source does appear to be extended
[Mon Aug 13 19:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 20:02:45 2012] XMMSAS src. selection expression = ellipse(24547.224180, 24483.596200, 583.652417, 583.652417, 0.000000, X, Y)
[Mon Aug 13 20:02:45 2012] Writing source region out to fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 13 20:02:45 2012] Extracting stamp from image fullrun_mos2_xmm0038540301_pi300-10000_cl_sm2.00.img.gz, (249, 248) - (316, 316)
[Mon Aug 13 20:02:45 2012] XMMSAS bgd. selection expression = annulus(24547.224180, 24483.596200, 972.754028, 1945.508056, X, Y) && !ellipse(23538.437775, 22617.020477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22765.344240, 24185.541600, 420.618412, 420.618412, 0.000000, X, Y)
[Mon Aug 13 20:02:45 2012] Writing fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1.gif
[Mon Aug 13 20:02:47 2012] Mean detx,y = (228.78, 96.78) 
[Mon Aug 13 20:02:48 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 20:02:56 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 20:02:57 2012] Setting source spectrum file to fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 20:02:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 13 20:15:57 2012] Updating aperture counts using extracted products
[Mon Aug 13 20:15:57 2012] Error reading totcts from fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 20:15:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 20:15:58 2012] Using photon index=1.80, rate=0.0197, arf fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 20:15:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 20:15:58 2012] Updating source flux to 2.1e-13
[Mon Aug 13 20:17:16 2012] Reading fit data from xmm0038540301/analysis//spectral/fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 13 20:17:16 2012] Spectral fit parameter nH value = 1.2042e+22
[Mon Aug 13 20:17:16 2012] Spectral fit parameter PhoIndex value = 9.989
[Mon Aug 13 20:17:16 2012] Failed to get F(0.3-8.0) from xmm0038540301/analysis//spectral/fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 13 20:17:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 20:17:16 2012] Using Nh = 1.2e+22, photon index=9.99, rate=0.0197, arf fullrun_mos2_xmm0038540301_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 20:17:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 20:17:16 2012] Updating source flux to 1.2e-13