[Tue Jun 18 04:12:32 2013] Detection parameters:
  Position = (309.3, 176.8) = 11 57 19.89 -73 48 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.7 +/- 7.9
  Background counts = 6.0
  Rate = 0.003 +/- 0.0006

[Tue Jun 18 04:12:32 2013] Off-axis axis estimate = 8.85'
[Tue Jun 18 04:31:03 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 04:31:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 04:31:03 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Tue Jun 18 04:31:03 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.836
[Tue Jun 18 04:31:03 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.86"
[Tue Jun 18 04:37:22 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 18 04:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 04:37:22 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 18 04:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 04:37:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 04:37:22 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 18 04:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 04:37:22 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 18 04:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 04:37:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 04:37:29 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.726313 pixels away
[Tue Jun 18 04:37:29 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 04:37:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 04:37:29 2013] Assessing source extent using major
[Tue Jun 18 04:37:29 2013] Source does appear to be extended
[Tue Jun 18 04:37:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 04:53:37 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 04:53:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 04:53:37 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Tue Jun 18 04:53:37 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.836
[Tue Jun 18 04:53:37 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.86"
[Tue Jun 18 05:00:07 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 18 05:00:07 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 18 05:00:07 2013] Fit fullrun_mos2_xmm0038540201_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jun 18 05:00:07 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 18 05:00:07 2013] fullrun_mos2_xmm0038540201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 18 05:00:07 2013] Fit fullrun_mos2_xmm0038540201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 18 05:00:14 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.058205 pixels away
[Tue Jun 18 05:00:14 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 05:00:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 05:00:14 2013] Assessing source extent using major
[Tue Jun 18 05:00:14 2013] Source does appear to be extended
[Tue Jun 18 05:00:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 05:05:29 2013] XMMSAS src. selection expression = ellipse(26861.990173, 15332.878571, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 05:05:29 2013] Writing source region out to fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4_src.reg
[Tue Jun 18 05:05:29 2013] Extracting stamp from image fullrun_mos2_xmm0038540201_pi300-10000_cl_sm2.00.img.gz, (272, 139) - (347, 214)
[Tue Jun 18 05:05:29 2013] XMMSAS bgd. selection expression = annulus(26861.990173, 15332.878571, 1087.500000, 2175.000000, X, Y)
[Tue Jun 18 05:05:29 2013] Writing fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4.gif
[Tue Jun 18 05:06:08 2013] Mean detx,y = (-4556.76, 8233.20) 
[Tue Jun 18 05:06:11 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 05:06:36 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 05:06:36 2013] Setting source spectrum file to fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 18 05:06:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun 18 05:06:52 2013] Not generating rmf since there are only 35 counts
[Tue Jun 18 05:06:52 2013] rmf not generated due to insufficient counts
[Tue Jun 18 05:07:35 2013] Updating aperture counts using extracted products
[Tue Jun 18 05:07:36 2013] Total counts from fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 51.00
[Tue Jun 18 05:07:36 2013] Total counts from fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 248.00
[Tue Jun 18 05:07:36 2013] Got source and background scale factors 1153244.000000, 10236867.000000
[Tue Jun 18 05:07:36 2013] User source parameters:
  Position = (309.3, 176.8) = 11 57 19.89 -73 48 16.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 23.1 +/- 8.2
  Background aperture counts = 27.9
  Rate = 0.003 +/- 0.001

[Tue Jun 18 05:07:36 2013] Updating counts from extracted products
[Tue Jun 18 05:07:36 2013] Set source signif. to 23.06/5.29 = 4.36
[Tue Jun 18 05:07:36 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 05:07:36 2013] Using photon index=1.80, rate=0.00313, arf fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4.arf
[Tue Jun 18 05:07:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 05:07:36 2013] Updating source flux to 5.9e-14
[Tue Jun 18 05:07:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 05:07:39 2013] xmm0038540201/analysis//spectral/fullrun_mos2_xmm0038540201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete