[Tue Jun 18 04:12:03 2013] Detection parameters:
  Position = (310.2, 176.1) = 11 57 19.02 -73 48 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 8.8
  Background counts = 7.8
  Rate = 0.005 +/- 0.001

[Tue Jun 18 04:12:03 2013] Off-axis axis estimate = 8.91'
[Tue Jun 18 04:25:50 2013] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 04:25:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 04:25:50 2013] Initial guess for spatial extent in simple fitting = 10.88"
[Tue Jun 18 04:25:50 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Tue Jun 18 04:25:50 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.88"
[Tue Jun 18 04:31:03 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 18 04:31:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_src2.csv
[Tue Jun 18 04:31:03 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 18 04:31:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_src2.csv
[Tue Jun 18 04:31:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 04:31:03 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 18 04:31:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 18 04:31:03 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 18 04:31:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 18 04:31:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038540201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 04:37:27 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.971549 pixels away
[Tue Jun 18 04:37:27 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 04:37:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 04:37:27 2013] Assessing source extent using major
[Tue Jun 18 04:37:27 2013] Source does appear to be extended
[Tue Jun 18 04:37:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 04:47:50 2013] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 04:47:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 04:47:50 2013] Initial guess for spatial extent in simple fitting = 10.88"
[Tue Jun 18 04:47:50 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Tue Jun 18 04:47:50 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.88"
[Tue Jun 18 04:53:37 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 18 04:53:37 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 18 04:53:37 2013] Fit fullrun_mos1_xmm0038540201_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jun 18 04:53:37 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 18 04:53:37 2013] fullrun_mos1_xmm0038540201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 18 04:53:37 2013] Fit fullrun_mos1_xmm0038540201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 18 05:00:12 2013] Spatial fit model total counts = 104.070000, observed total counts = 105.000000
[Tue Jun 18 05:00:12 2013] Offset between fit and detection position for source 3 = 0.869488 pixels
[Tue Jun 18 05:00:12 2013] 102.636300 total counts/ 61.068200 bgd. counts: snr = 5.319277
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.869488 pixels
  Position = (310.9, 176.6) = 11 57 18.27 -73 48 15.7
  Extent = 11.2 (7.5-15.5)" x 3.6 (2.7-5.0)", rotation angle = 325 (314-339) degrees
  Source counts = 41.6 +/- 10.1
  Background counts = 61.1
  Rate = 0.006 +/- 0.001
[Tue Jun 18 05:00:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 05:00:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 05:00:12 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 05:00:12 2013] Source does appear to be extended
[Tue Jun 18 05:00:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.50
[Tue Jun 18 05:00:12 2013] Source is asymmetric
[Tue Jun 18 05:04:06 2013] XMMSAS src. selection expression = ellipse(26998.537000, 15315.384400, 673.596019, 218.394606, 325.393252, X, Y)
[Tue Jun 18 05:04:06 2013] Writing source region out to fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 18 05:04:06 2013] Extracting stamp from image fullrun_mos1_xmm0038540201_pi300-10000_cl_sm2.00.img.gz, (272, 138) - (350, 215)
[Tue Jun 18 05:04:06 2013] XMMSAS bgd. selection expression = annulus(26998.537000, 15315.384400, 1122.660032, 2245.320065, X, Y)
[Tue Jun 18 05:04:06 2013] Writing fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3.gif
[Tue Jun 18 05:04:24 2013] Mean detx,y = (8108.70, 4506.77) 
[Tue Jun 18 05:04:27 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 05:04:55 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 05:04:56 2013] Setting source spectrum file to fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 18 05:04:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 18 05:05:19 2013] Not generating rmf since there are only 41 counts
[Tue Jun 18 05:05:19 2013] rmf not generated due to insufficient counts
[Tue Jun 18 05:07:34 2013] Updating aperture counts using extracted products
[Tue Jun 18 05:07:34 2013] Total counts from fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 40.00
[Tue Jun 18 05:07:34 2013] Total counts from fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 262.00
[Tue Jun 18 05:07:35 2013] Got source and background scale factors 460800.000000, 10371177.000000
[Tue Jun 18 05:07:35 2013] User source parameters:
  Position = (310.9, 176.6) = 11 57 18.27 -73 48 15.7
  Extent = 11.2 (7.5-15.5)" x 3.6 (2.7-5.0)", rotation angle = 325 (314-339) degrees
  Source aperture counts = 28.4 +/- 7.4
  Background aperture counts = 11.6
  Rate = 0.004 +/- 0.001

[Tue Jun 18 05:07:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 05:07:35 2013] Using photon index=1.80, rate=0.00564, arf fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3.arf
[Tue Jun 18 05:07:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 05:07:35 2013] Updating source flux to 1.1e-13
[Tue Jun 18 05:07:37 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 18 05:07:38 2013] xmm0038540201/analysis//spectral/fullrun_mos1_xmm0038540201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete