[Wed Jun 20 03:34:13 2012] Detection parameters:
  Position = (303.4, 282.9) = 23 0 54.81 58 52 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.8 +/- 36.4
  Background counts = 544.6
  Rate = 0.006 +/- 0.001

[Wed Jun 20 03:34:13 2012] Off-axis axis estimate = 1.18'
[Wed Jun 20 03:48:55 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 03:48:55 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Wed Jun 20 03:48:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.119
[Wed Jun 20 03:48:55 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.02"
[Wed Jun 20 04:12:48 2012] fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jun 20 04:12:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_src10.csv
[Wed Jun 20 04:12:48 2012] fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jun 20 04:12:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_src10.csv
[Wed Jun 20 04:12:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 04:12:48 2012] fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jun 20 04:12:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun 20 04:12:48 2012] fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jun 20 04:12:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun 20 04:12:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:32 2012] Spatial fit model total counts = 8043.950000, observed total counts = 6784.000000
[Wed Jun 20 15:29:32 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 15:29:32 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:32 2012] Assessing source extent using major
[Wed Jun 20 15:29:32 2012] Source does appear to be extended
[Wed Jun 20 15:29:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:32 2012] Deleting source due to low Poisson probability 0.9