[Wed Jun 20 03:36:16 2012] Detection parameters:
  Position = (198.1, 289.2) = 23 1 53.89 58 52 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.6 +/- 26.2
  Background counts = 264.8
  Rate = 0.004 +/- 0.0007

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 7.30'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.3, npix_max = 31, mask sum = 34, frac = 1.071
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.08"
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src38.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src38.csv
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src38.csv
[Wed Jun 20 15:29:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Jun 20 15:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Jun 20 15:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Jun 20 15:29:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:30:13 2012] Spatial fit model total counts = 3471.980000, observed total counts = 3084.000000
[Wed Jun 20 15:30:13 2012] Poor agreement between spatial fit and data for source 99
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 02:50:31 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Thu Jun 21 02:50:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 34, frac = 1.071
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 10.08"
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src34.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src34.csv
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src34.csv
[Thu Jun 21 08:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu Jun 21 08:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu Jun 21 08:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Thu Jun 21 08:47:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:48:09 2012] Spatial fit model total counts = 3472.170000, observed total counts = 3084.000000
[Thu Jun 21 08:48:09 2012] Poor agreement between spatial fit and data for source 99
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 08:48:10 2012] Source is confused with source 95
[Thu Jun 21 14:46:24 2012] XMMSAS src. selection expression = ellipse(17189.837921, 25116.090698, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src99_src.reg
[Thu Jun 21 14:46:24 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (161, 252) - (236, 327)
[Thu Jun 21 14:46:24 2012] XMMSAS bgd. selection expression = annulus(17189.837921, 25116.090698, 1087.500000, 2175.000000, X, Y) && !ellipse(17280.402298, 25810.444580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16419.319214, 26868.264008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.996780, 26652.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15390.257736, 27193.159943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15932.023102, 27013.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14883.792313, 27540.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16645.081665, 25872.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.458000, 28206.082000, 1644.904047, 1644.904047, 0.000000, X, Y) && !ellipse(17026.505829, 27355.305237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14219.522568, 27401.497437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18048.175705, 25280.832611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14162.791229, 26717.057434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17906.928000, 25809.374760, 2997.536086, 2997.536086, 0.000000, X, Y) && !ellipse(18624.982000, 25718.339000, 1498.768043, 1498.768043, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src99.gif
[Thu Jun 21 15:24:25 2012] Mean detx,y = (-6995.28, 1604.58) 
[Thu Jun 21 15:24:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:24:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:24:45 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Thu Jun 21 15:24:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Thu Jun 21 17:20:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 17:20:40 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:22 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:22 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Thu Jun 21 18:54:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:27 2012] Using photon index=1.80, rate=0.00442, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src99.arf
[Thu Jun 21 18:54:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:27 2012] Updating source flux to 6.6e-14
[Thu Jun 21 19:07:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting