[Wed Jun 20 03:36:16 2012] Detection parameters:
  Position = (206.5, 296.8) = 23 1 49.22 58 53 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.6 +/- 22.4
  Background counts = 283.0
  Rate = 0.004 +/- 0.0006

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 6.67'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.2, npix_max = 30, mask sum = 17, frac = 0.564
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 9.76"
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src56.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src56.csv
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src56_1.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src56.csv
[Wed Jun 20 15:29:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:27 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Wed Jun 20 15:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Wed Jun 20 15:29:27 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Wed Jun 20 15:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Wed Jun 20 15:29:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:30:14 2012] Warning, spatial fit 56 centroid is now closest to src. 11
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:30:14 2012] Source is confused with source 7
[Thu Jun 21 02:50:31 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Thu Jun 21 02:50:31 2012] source mask rpix=2.2, npix_max = 30, mask sum = 17, frac = 0.564
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 9.76"
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src49.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src49.csv
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src49_1.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src49.csv
[Thu Jun 21 08:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:22 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Thu Jun 21 08:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Thu Jun 21 08:47:22 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Thu Jun 21 08:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Thu Jun 21 08:47:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 49 centroid is now closest to src. 98
[Thu Jun 21 08:48:10 2012] Spatial fit model total counts = 8425.390000, observed total counts = 7762.000000
[Thu Jun 21 08:48:10 2012] Offset between fit and detection position for source 95 = 0.416949 pixels
[Thu Jun 21 08:48:10 2012] Warning, changing simple spatial fit ID from 49 to 58
[Thu Jun 21 08:48:10 2012] 8262.770000 total counts/ 6764.880000 bgd. counts: snr = 18.211674
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 0.416949 pixels
  Position = (206.4, 297.2) = 23 1 49.28 58 53 37.1
  Extent = 37.5 (23.1-74.9)", rotation angle = 0
  Source counts = 1497.9 +/- 90.9
  Background counts = 6764.9
  Rate = 0.03 +/- 0.002
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:25 2012] Counts = 1497.890000, rescaling region sizes by 2.000000
[Thu Jun 21 14:46:25 2012] XMMSAS src. selection expression = ellipse(17906.928000, 25809.374760, 4496.304129, 4496.304129, 0.000000, X, Y)
[Thu Jun 21 14:46:25 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src95_src.reg
[Thu Jun 21 14:46:25 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (0, 39) - (465, 556)
[Thu Jun 21 14:46:25 2012] XMMSAS bgd. selection expression = annulus(17906.928000, 25809.374760, 14987.680431, 29975.360863, X, Y) && !ellipse(24299.764060, 24736.881000, 1579.569645, 1579.569645, 0.000000, X, Y) && !ellipse(24041.576000, 25103.816600, 1200.152035, 1200.152035, 0.000000, X, Y) && !ellipse(28164.122600, 22046.007600, 354.419210, 354.419210, 0.000000, X, Y) && !ellipse(23447.933136, 25184.059448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29720.851560, 24782.411400, 365.065611, 365.065611, 0.000000, X, Y) && !ellipse(17280.402298, 25810.444580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16419.319214, 26868.264008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23287.832214, 23804.490295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.996780, 26652.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15390.257736, 27193.159943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25941.441071, 23874.139679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15932.023102, 27013.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14883.792313, 27540.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14861.052000, 29382.944000, 1775.992051, 1775.992051, 0.000000, X, Y) && !ellipse(15296.170135, 28399.873413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15227.146000, 33845.098000, 1914.928055, 1914.928055, 0.000000, X, Y) && !ellipse(16645.081665, 25872.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14942.770400, 22066.217800, 372.500011, 372.500011, 0.000000, X, Y) && !ellipse(13584.387200, 31930.994000, 2232.296064, 2232.296064, 0.000000, X, Y) && !ellipse(16781.458000, 28206.082000, 1644.904047, 1644.904047, 0.000000, X, Y) && !ellipse(14017.655800, 31394.492000, 1131.280033, 1131.280033, 0.000000, X, Y) && !ellipse(14439.607239, 32243.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23452.381180, 27850.070600, 601.481617, 601.481617, 0.000000, X, Y) && !ellipse(22516.291321, 17347.658173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17015.348068, 28642.450165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13711.772110, 23674.247833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20320.274000, 36201.881200, 3591.808103, 3591.808103, 0.000000, X, Y) && !ellipse(17026.505829, 27355.305237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23792.265600, 18762.294600, 405.620012, 405.620012, 0.000000, X, Y) && !ellipse(23549.576000, 21747.214000, 1286.224037, 1286.224037, 0.000000, X, Y) && !ellipse(17189.837921, 25116.090698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14219.522568, 27401.497437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13014.001205, 26865.513397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18048.175705, 25280.832611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14162.791229, 26717.057434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14521.540000, 31048.952000, 2694.808078, 2694.808078, 0.000000, X, Y) && !ellipse(24093.880524, 23020.850433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15346.002000, 30719.688000, 1831.160053, 1831.160053, 0.000000, X, Y) && !ellipse(21829.664902, 16888.541214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21625.633865, 17974.539795, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(21035.188000, 36591.001200, 1809.120052, 1809.120052, 0.000000, X, Y) && !ellipse(14329.201828, 32837.271667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22142.392838, 36915.840057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20994.574554, 34192.281799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20615.136000, 36244.856000, 3455.744099, 1387.952040, 0.000000, X, Y) && !ellipse(27635.469800, 25276.639600, 573.850417, 573.850417, 0.000000, X, Y) && !ellipse(15137.173706, 31999.344421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21303.522000, 36338.049000, 1795.904052, 1795.904052, 0.000000, X, Y) && !ellipse(23983.638397, 22321.855560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21308.839752, 41487.418182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18624.982000, 25718.339000, 1498.768043, 1498.768043, 0.000000, X, Y) && !ellipse(13489.116000, 32472.860000, 1963.344056, 1963.344056, 0.000000, X, Y) && !ellipse(17663.518800, 32253.772000, 1448.904042, 1448.904042, 0.000000, X, Y) && !ellipse(15201.778000, 32884.610000, 1875.584054, 1875.584054, 0.000000, X, Y) && !ellipse(11387.587341, 35240.885620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16679.214722, 38571.864136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24867.933075, 41544.947357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.976000, 26450.256000, 1116.488032, 1116.488032, 0.000000, X, Y) && !ellipse(22304.181030, 41611.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23280.083436, 34279.828317, 1608.312046, 541.605017, 1.266466, X, Y) && !ellipse(31342.522000, 18288.037000, 1623.984047, 1623.984047, 0.000000, X, Y) && !ellipse(15949.011307, 38937.748413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23502.979858, 41770.266418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.244000, 28017.366000, 1288.264037, 1288.264037, 0.000000, X, Y) && !ellipse(14004.495728, 33367.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.089386, 28739.754333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24104.705078, 41731.441925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30599.523400, 28231.777000, 858.056025, 858.056025, 0.000000, X, Y) && !ellipse(22955.701324, 20395.822968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17137.793600, 12419.306220, 930.624027, 930.624027, 0.000000, X, Y) && !ellipse(12664.716171, 32137.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.374985, 14309.253265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25281.782000, 41974.458000, 2099.256060, 2099.256060, 0.000000, X, Y) && !ellipse(20880.977798, 41116.985840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25341.282318, 28046.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12803.156036, 12885.565491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.106689, 27340.731781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21759.509735, 14399.732681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12429.033203, 34851.151215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.375031, 41440.660461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12187.093658, 34307.788849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21684.364000, 27623.660000, 1289.328037, 1289.328037, 0.000000, X, Y) && !ellipse(12674.761475, 33379.277313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13936.549545, 12255.787231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.435547, 37225.397888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.848114, 26742.928040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.950928, 8635.952148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13234.211990, 33336.037506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14131.053009, 18817.153168, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 14:46:25 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src95.gif
[Thu Jun 21 15:34:15 2012] Mean detx,y = (-6902.91, 470.14) 
[Thu Jun 21 15:34:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:44:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:44:44 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Thu Jun 21 15:44:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Thu Jun 21 18:54:23 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:23 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Thu Jun 21 18:54:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:27 2012] Using photon index=1.80, rate=0.0327, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src95.arf
[Thu Jun 21 18:54:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:27 2012] Updating source flux to 4.5e-13
[Thu Jun 21 19:07:42 2012] Flag c found in src. 95 procflags, skipping spectral fitting