[Wed Jun 20 03:36:16 2012] Detection parameters:
  Position = (305.4, 307.9) = 23 0 53.70 58 54 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 21.9
  Background counts = 155.1
  Rate = 0.002 +/- 0.0004

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 0.85'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Wed Jun 20 09:38:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 112 for pass 0, mean size = 6.86"
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 02:50:31 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Thu Jun 21 02:50:31 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 96 for pass 1, mean size = 6.86"
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src96.ximg exists
[Thu Jun 21 08:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src96.csv
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src96_1.ximg exists
[Thu Jun 21 08:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src96.csv
[Thu Jun 21 08:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Thu Jun 21 08:47:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Thu Jun 21 08:47:23 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src96 appears to have run properly
[Thu Jun 21 08:48:10 2012] Source 91 is offset by 1.401794 and -7.356689 pixels which is larger than
2 X fitted extent = 1.711251 x 1.711251, not incorporating fit results
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:28 2012] XMMSAS src. selection expression = ellipse(26520.848114, 26742.928040, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 14:46:28 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src91_src.reg
[Thu Jun 21 14:46:28 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (268, 270) - (343, 345)
[Thu Jun 21 14:46:28 2012] XMMSAS bgd. selection expression = annulus(26520.848114, 26742.928040, 1087.500000, 2175.000000, X, Y) && !ellipse(24299.764060, 24736.881000, 1579.569645, 1579.569645, 0.000000, X, Y) && !ellipse(24041.576000, 25103.816600, 1200.152035, 1200.152035, 0.000000, X, Y) && !ellipse(25941.441071, 23874.139679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.469800, 25276.639600, 573.850417, 573.850417, 0.000000, X, Y) && !ellipse(24655.976000, 26450.256000, 1116.488032, 1116.488032, 0.000000, X, Y) && !ellipse(23608.244000, 28017.366000, 1288.264037, 1288.264037, 0.000000, X, Y) && !ellipse(24326.089386, 28739.754333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25341.282318, 28046.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.106689, 27340.731781, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 14:46:28 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src91.gif
[Thu Jun 21 16:10:07 2012] Mean detx,y = (1510.95, -2576.91) 
[Thu Jun 21 16:10:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 16:10:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 16:10:29 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Thu Jun 21 16:10:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Thu Jun 21 18:52:32 2012] Not generating rmf since there are only 93 counts
[Thu Jun 21 18:52:32 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:24 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:24 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Thu Jun 21 18:54:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:29 2012] Using photon index=1.80, rate=0.00191, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src91.arf
[Thu Jun 21 18:54:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:29 2012] Updating source flux to 1.9e-14
[Thu Jun 21 19:07:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting