[Wed Jun 20 03:36:16 2012] Detection parameters:
  Position = (177.5, 313.1) = 23 2 5.55 58 54 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.0 +/- 28.4
  Background counts = 326.9
  Rate = 0.008 +/- 0.0009

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 8.84'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.893
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.85"
[Wed Jun 20 15:29:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 20 15:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 20 15:29:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 20 15:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 20 15:29:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 20 15:29:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 20 15:29:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 15:29:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:30:13 2012] Warning, spatial fit 11 centroid is now closest to src. 74
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:30:14 2012] Source is confused with source 86
[Wed Jun 20 15:30:14 2012] Source is confused with source 82
[Thu Jun 21 02:50:31 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Thu Jun 21 02:50:31 2012] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.893
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.85"
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 21 08:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 21 08:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 08:47:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 21 08:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 21 08:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 08:47:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 11 centroid is now closest to src. 82
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:23 2012] XMMSAS src. selection expression = ellipse(15390.257736, 27193.159943, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 14:46:23 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src87_src.reg
[Thu Jun 21 14:46:23 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (140, 276) - (215, 351)
[Thu Jun 21 14:46:23 2012] XMMSAS bgd. selection expression = annulus(15390.257736, 27193.159943, 1087.500000, 2175.000000, X, Y) && !ellipse(17280.402298, 25810.444580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16419.319214, 26868.264008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.996780, 26652.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15932.023102, 27013.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14883.792313, 27540.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14861.052000, 29382.944000, 1775.992051, 1775.992051, 0.000000, X, Y) && !ellipse(15296.170135, 28399.873413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16645.081665, 25872.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.458000, 28206.082000, 1644.904047, 1644.904047, 0.000000, X, Y) && !ellipse(17015.348068, 28642.450165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17026.505829, 27355.305237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17189.837921, 25116.090698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14219.522568, 27401.497437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13014.001205, 26865.513397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18048.175705, 25280.832611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14162.791229, 26717.057434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14521.540000, 31048.952000, 2694.808078, 2694.808078, 0.000000, X, Y) && !ellipse(15346.002000, 30719.688000, 1831.160053, 1831.160053, 0.000000, X, Y) && !ellipse(17906.928000, 25809.374760, 2997.536086, 2997.536086, 0.000000, X, Y) && !ellipse(18624.982000, 25718.339000, 1498.768043, 1498.768043, 0.000000, X, Y)
[Thu Jun 21 14:46:23 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src87.gif
[Thu Jun 21 15:01:13 2012] Mean detx,y = (-9266.61, 102.61) 
[Thu Jun 21 15:01:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:01:32 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:01:33 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Thu Jun 21 15:01:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Thu Jun 21 16:30:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 16:30:38 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:21 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:21 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Thu Jun 21 18:54:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:25 2012] Using photon index=1.80, rate=0.00768, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src87.arf
[Thu Jun 21 18:54:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:25 2012] Updating source flux to 1.2e-13
[Thu Jun 21 19:07:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting