[Wed Jun 20 03:36:14 2012] Detection parameters:
  Position = (164.0, 315.5) = 23 2 13.11 58 54 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.0 +/- 26.6
  Background counts = 312.2
  Rate = 0.004 +/- 0.0005

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 9.82'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.6, npix_max = 38, mask sum = 29, frac = 0.751
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 11.34"
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src39.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src39.csv
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src39.csv
[Wed Jun 20 15:29:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Jun 20 15:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Jun 20 15:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Jun 20 15:29:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:30:13 2012] Warning, spatial fit 39 centroid is now closest to src. 75
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 02:50:31 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Thu Jun 21 02:50:31 2012] source mask rpix=2.6, npix_max = 38, mask sum = 29, frac = 0.751
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.34"
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src35.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src35.csv
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src35.csv
[Thu Jun 21 08:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Jun 21 08:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Jun 21 08:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu Jun 21 08:47:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 35 centroid is now closest to src. 82
[Thu Jun 21 08:48:09 2012] Source 8 is offset by 1.606321 and -2.836236 pixels which is larger than
2 X fitted extent = 1.303094 x 1.303094, not incorporating fit results
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:24 2012] XMMSAS src. selection expression = ellipse(14219.522568, 27401.497437, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src8_src.reg
[Thu Jun 21 14:46:24 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (127, 278) - (202, 353)
[Thu Jun 21 14:46:24 2012] XMMSAS bgd. selection expression = annulus(14219.522568, 27401.497437, 1087.500000, 2175.000000, X, Y) && !ellipse(16419.319214, 26868.264008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.996780, 26652.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15390.257736, 27193.159943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15932.023102, 27013.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14883.792313, 27540.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14861.052000, 29382.944000, 1775.992051, 1775.992051, 0.000000, X, Y) && !ellipse(15296.170135, 28399.873413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16645.081665, 25872.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.458000, 28206.082000, 1644.904047, 1644.904047, 0.000000, X, Y) && !ellipse(17015.348068, 28642.450165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17026.505829, 27355.305237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17189.837921, 25116.090698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13014.001205, 26865.513397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14162.791229, 26717.057434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14521.540000, 31048.952000, 2694.808078, 2694.808078, 0.000000, X, Y) && !ellipse(15346.002000, 30719.688000, 1831.160053, 1831.160053, 0.000000, X, Y) && !ellipse(17906.928000, 25809.374760, 2997.536086, 2997.536086, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src8.gif
[Thu Jun 21 15:24:56 2012] Mean detx,y = (-10406.72, 248.80) 
[Thu Jun 21 15:24:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:25:12 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:25:12 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 21 15:25:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jun 21 17:20:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 17:20:55 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:22 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:22 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 21 18:54:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:27 2012] Using photon index=1.80, rate=0.00442, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src8.arf
[Thu Jun 21 18:54:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:27 2012] Updating source flux to 7.7e-14
[Thu Jun 21 19:07:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting