[Wed Jun 20 03:36:16 2012] Detection parameters:
  Position = (172.4, 357.5) = 23 2 8.52 58 58 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.4 +/- 25.3
  Background counts = 241.0
  Rate = 0.004 +/- 0.0009

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 10.09'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.244
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 11.47"
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src48.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src48.csv
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src48.csv
[Wed Jun 20 15:29:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed Jun 20 15:29:26 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Wed Jun 20 15:30:13 2012] Spatial fit model total counts = 2674.470000, observed total counts = 2670.000000
[Wed Jun 20 15:30:13 2012] Offset between fit and detection position for source 64 = 5.947271 pixels
[Wed Jun 20 15:30:13 2012] 2527.963000 total counts/ 1897.060000 bgd. counts: snr = 14.485119
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 5.947271 pixels
  Position = (176.9, 353.7) = 23 2 5.94 58 57 42.2
  Extent = 22.9 (22.8-22.9)", rotation angle = 0
  Source counts = 630.9 +/- 50.3
  Background counts = 1897.1
  Rate = 0.01 +/- 0.001
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:30:14 2012] Source is confused with source 63
[Thu Jun 21 02:50:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 22.89"
[Thu Jun 21 02:50:31 2012] source mask rpix=5.3, npix_max = 132, mask sum = 132, frac = 0.994
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 22.89"
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src43.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src43.csv
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src43.csv
[Thu Jun 21 08:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu Jun 21 08:47:21 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Thu Jun 21 08:48:09 2012] Source 64 is offset by -0.484138 and -6.910230 pixels which is larger than
2 X fitted extent = 1.366556 x 1.366556, not incorporating fit results
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 43 centroid is now closest to src. 69
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:25 2012] XMMSAS src. selection expression = ellipse(15346.002000, 30719.688000, 1373.370040, 1373.370040, 0.000000, X, Y)
[Thu Jun 21 14:46:25 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src64_src.reg
[Thu Jun 21 14:46:25 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (98, 275) - (256, 433)
[Thu Jun 21 14:46:25 2012] XMMSAS bgd. selection expression = annulus(15346.002000, 30719.688000, 2288.950066, 4577.900132, X, Y) && !ellipse(17280.402298, 25810.444580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16419.319214, 26868.264008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.996780, 26652.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15390.257736, 27193.159943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15932.023102, 27013.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14883.792313, 27540.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14861.052000, 29382.944000, 1775.992051, 1775.992051, 0.000000, X, Y) && !ellipse(15296.170135, 28399.873413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15227.146000, 33845.098000, 1914.928055, 1914.928055, 0.000000, X, Y) && !ellipse(16645.081665, 25872.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13584.387200, 31930.994000, 2232.296064, 2232.296064, 0.000000, X, Y) && !ellipse(16781.458000, 28206.082000, 1644.904047, 1644.904047, 0.000000, X, Y) && !ellipse(14017.655800, 31394.492000, 1131.280033, 1131.280033, 0.000000, X, Y) && !ellipse(14439.607239, 32243.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17015.348068, 28642.450165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20320.274000, 36201.881200, 3591.808103, 3591.808103, 0.000000, X, Y) && !ellipse(17026.505829, 27355.305237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14219.522568, 27401.497437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13014.001205, 26865.513397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18048.175705, 25280.832611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14162.791229, 26717.057434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14521.540000, 31048.952000, 2694.808078, 2694.808078, 0.000000, X, Y) && !ellipse(21035.188000, 36591.001200, 1809.120052, 1809.120052, 0.000000, X, Y) && !ellipse(14329.201828, 32837.271667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17906.928000, 25809.374760, 2997.536086, 2997.536086, 0.000000, X, Y) && !ellipse(20615.136000, 36244.856000, 3455.744099, 1387.952040, 0.000000, X, Y) && !ellipse(15137.173706, 31999.344421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21303.522000, 36338.049000, 1795.904052, 1795.904052, 0.000000, X, Y) && !ellipse(18624.982000, 25718.339000, 1498.768043, 1498.768043, 0.000000, X, Y) && !ellipse(13489.116000, 32472.860000, 1963.344056, 1963.344056, 0.000000, X, Y) && !ellipse(17663.518800, 32253.772000, 1448.904042, 1448.904042, 0.000000, X, Y) && !ellipse(15201.778000, 32884.610000, 1875.584054, 1875.584054, 0.000000, X, Y) && !ellipse(11387.587341, 35240.885620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14004.495728, 33367.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12664.716171, 32137.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12429.033203, 34851.151215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12187.093658, 34307.788849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12674.761475, 33379.277313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13234.211990, 33336.037506, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 14:46:25 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src64.gif
[Thu Jun 21 15:28:45 2012] Mean detx,y = (-10344.32, -3074.16) 
[Thu Jun 21 15:28:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:29:27 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:29:27 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Jun 21 15:29:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Thu Jun 21 18:54:22 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:22 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Jun 21 18:54:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:27 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src64.arf
[Thu Jun 21 18:54:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:27 2012] Updating source flux to 2.1e-13
[Thu Jun 21 19:07:42 2012] Flag b found in src. 64 procflags, skipping spectral fitting
[Thu Jun 21 19:07:42 2012] Flag c found in src. 64 procflags, skipping spectral fitting