[Wed Jun 20 03:36:16 2012] Detection parameters:
  Position = (160.7, 360.3) = 23 2 15.12 58 58 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.1 +/- 27.2
  Background counts = 228.8
  Rate = 0.006 +/- 0.001

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 10.95'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.170
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.90"
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src25.csv
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src25.csv
[Wed Jun 20 15:29:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jun 20 15:29:26 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Jun 20 15:30:13 2012] Spatial fit model total counts = 2568.300000, observed total counts = 2570.000000
[Wed Jun 20 15:30:13 2012] Offset between fit and detection position for source 61 = 1.534223 pixels
[Wed Jun 20 15:30:13 2012] 2315.024000 total counts/ 2014.160000 bgd. counts: snr = 6.703834
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.534223 pixels
  Position = (161.7, 361.4) = 23 2 14.55 58 58 15.6
  Extent = 14.1 (6.7-23.8)", rotation angle = 0
  Source counts = 300.9 +/- 48.1
  Background counts = 2014.2
  Rate = 0.007 +/- 0.001
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:30:14 2012] Source is confused with source 62
[Thu Jun 21 02:50:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 14.14"
[Thu Jun 21 02:50:31 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.871
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 14.14"
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src23.csv
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src23.csv
[Thu Jun 21 08:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jun 21 08:47:21 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 23 centroid is now closest to src. 47
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:24 2012] XMMSAS src. selection expression = ellipse(14017.655800, 31394.492000, 848.460024, 848.460024, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src61_src.reg
[Thu Jun 21 14:46:24 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (113, 313) - (210, 410)
[Thu Jun 21 14:46:24 2012] XMMSAS bgd. selection expression = annulus(14017.655800, 31394.492000, 1414.100041, 2828.200081, X, Y) && !ellipse(14861.052000, 29382.944000, 1775.992051, 1775.992051, 0.000000, X, Y) && !ellipse(15296.170135, 28399.873413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15227.146000, 33845.098000, 1914.928055, 1914.928055, 0.000000, X, Y) && !ellipse(13584.387200, 31930.994000, 2232.296064, 2232.296064, 0.000000, X, Y) && !ellipse(16781.458000, 28206.082000, 1644.904047, 1644.904047, 0.000000, X, Y) && !ellipse(14439.607239, 32243.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17015.348068, 28642.450165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20320.274000, 36201.881200, 3591.808103, 3591.808103, 0.000000, X, Y) && !ellipse(14521.540000, 31048.952000, 2694.808078, 2694.808078, 0.000000, X, Y) && !ellipse(15346.002000, 30719.688000, 1831.160053, 1831.160053, 0.000000, X, Y) && !ellipse(14329.201828, 32837.271667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17906.928000, 25809.374760, 2997.536086, 2997.536086, 0.000000, X, Y) && !ellipse(15137.173706, 31999.344421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13489.116000, 32472.860000, 1963.344056, 1963.344056, 0.000000, X, Y) && !ellipse(17663.518800, 32253.772000, 1448.904042, 1448.904042, 0.000000, X, Y) && !ellipse(15201.778000, 32884.610000, 1875.584054, 1875.584054, 0.000000, X, Y) && !ellipse(14004.495728, 33367.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12664.716171, 32137.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12429.033203, 34851.151215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12187.093658, 34307.788849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12674.761475, 33379.277313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13234.211990, 33336.037506, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src61.gif
[Thu Jun 21 15:08:33 2012] Mean detx,y = (-11778.35, -3432.22) 
[Thu Jun 21 15:08:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:09:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:09:04 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Jun 21 15:09:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Thu Jun 21 18:54:22 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:22 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Jun 21 18:54:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:26 2012] Using photon index=1.80, rate=0.00657, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src61.arf
[Thu Jun 21 18:54:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:26 2012] Updating source flux to 1.2e-13
[Thu Jun 21 19:07:42 2012] Flag c found in src. 61 procflags, skipping spectral fitting