[Wed Jun 20 03:36:14 2012] Detection parameters:
  Position = (324.3, 254.0) = 23 0 43.12 58 50 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 733.4 +/- 36.5
  Background counts = 121.0
  Rate = 0.02 +/- 0.0009

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 3.73'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Wed Jun 20 09:38:52 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.29"
[Wed Jun 20 15:29:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 20 15:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 15:29:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 20 15:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 15:29:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 20 15:29:25 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun 20 15:30:13 2012] Spatial fit model total counts = 1549.250000, observed total counts = 1550.000000
[Wed Jun 20 15:30:13 2012] Offset between fit and detection position for source 5 = 0.010442 pixels
[Wed Jun 20 15:30:13 2012] 1543.351000 total counts/ 1132.450000 bgd. counts: snr = 12.210338
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.010442 pixels
  Position = (324.3, 254.0) = 23 0 43.12 58 50 29.6
  Extent = 4.4 (4.0-4.9)", rotation angle = 0
  Source counts = 410.9 +/- 39.3
  Background counts = 1132.5
  Rate = 0.009 +/- 0.0009
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 02:50:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 4.43"
[Thu Jun 21 02:50:31 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.976
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.43"
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 21 08:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 21 08:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 08:47:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 21 08:47:20 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 21 08:48:09 2012] Spatial fit model total counts = 1549.250000, observed total counts = 1550.000000
[Thu Jun 21 08:48:09 2012] Offset between fit and detection position for source 5 = 0.000000 pixels
[Thu Jun 21 08:48:09 2012] 1543.351000 total counts/ 1132.450000 bgd. counts: snr = 12.210338
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000000 pixels
  Position = (324.3, 254.0) = 23 0 43.12 58 50 29.6
  Extent = 4.4 (4.0-4.9)", rotation angle = 0
  Source counts = 410.9 +/- 39.3
  Background counts = 1132.5
  Rate = 0.009 +/- 0.0009
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:23 2012] XMMSAS src. selection expression = ellipse(28164.122600, 22046.007600, 265.814408, 265.814408, 0.000000, X, Y)
[Thu Jun 21 14:46:23 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 21 14:46:23 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (309, 239) - (340, 269)
[Thu Jun 21 14:46:23 2012] XMMSAS bgd. selection expression = annulus(28164.122600, 22046.007600, 443.024013, 886.048025, X, Y)
[Thu Jun 21 14:46:23 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src5.gif
[Thu Jun 21 14:57:45 2012] Mean detx,y = (4456.74, 1428.38) 
[Thu Jun 21 14:57:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 14:58:01 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 14:58:02 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 21 14:58:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 21 18:54:21 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:21 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 21 18:54:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:25 2012] Using photon index=1.80, rate=0.00897, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src5.arf
[Thu Jun 21 18:54:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:25 2012] Updating source flux to 1.6e-13