[Wed Jun 20 03:36:15 2012] Detection parameters:
  Position = (175.3, 386.9) = 23 2 6.97 59 0 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.1 +/- 24.3
  Background counts = 139.1
  Rate = 0.006 +/- 0.0009

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 10.99'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 11.93"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.857
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.93"
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src20.ximg exists
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Jun 20 15:29:24 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src20 appears to have run properly
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Jun 20 15:29:26 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Jun 20 15:30:13 2012] Warning, spatial fit 20 centroid is now closest to src. 54
[Wed Jun 20 15:30:13 2012] Spatial fit model total counts = 2377.590000, observed total counts = 2371.000000
[Wed Jun 20 15:30:13 2012] Offset between fit and detection position for source 48 = 2.740164 pixels
[Wed Jun 20 15:30:13 2012] Warning, changing simple spatial fit ID from 20 to 54
[Wed Jun 20 15:30:13 2012] 2316.840000 total counts/ 2194.500000 bgd. counts: snr = 2.611564
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.740164 pixels
  Position = (175.6, 389.6) = 23 2 6.80 59 0 18.4
  Extent = 24.1 (24.1-48.2)", rotation angle = 0
  Source counts = 122.3 +/- 48.1
  Background counts = 2194.5
  Rate = 0.003 +/- 0.001
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:30:14 2012] Source is confused with source 54
[Wed Jun 20 15:30:14 2012] Source is confused with source 47
[Wed Jun 20 15:30:14 2012] Source is confused with source 51
[Wed Jun 20 15:30:14 2012] Source is confused with source 43
[Thu Jun 21 02:50:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 24.10"
[Thu Jun 21 02:50:31 2012] source mask rpix=5.5, npix_max = 145, mask sum = 132, frac = 0.904
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 24.10"
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src18.ximg exists
[Thu Jun 21 08:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src18.csv
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src18.csv
[Thu Jun 21 08:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jun 21 08:47:21 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 18 centroid is now closest to src. 28
[Thu Jun 21 08:48:09 2012] Spatial fit model total counts = 2370.120000, observed total counts = 2371.000000
[Thu Jun 21 08:48:09 2012] Offset between fit and detection position for source 48 = 0.000815 pixels
[Thu Jun 21 08:48:09 2012] Warning, changing simple spatial fit ID from 18 to 47
[Thu Jun 21 08:48:09 2012] 2297.922000 total counts/ 2177.560000 bgd. counts: snr = 2.579315
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.000815 pixels
  Position = (175.6, 389.6) = 23 2 6.80 59 0 18.4
  Extent = 23.9 (23.6-24.1)", rotation angle = 0
  Source counts = 120.4 +/- 47.9
  Background counts = 2177.6
  Rate = 0.003 +/- 0.001
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:23 2012] XMMSAS src. selection expression = ellipse(15227.146000, 33845.098000, 1436.196041, 1436.196041, 0.000000, X, Y)
[Thu Jun 21 14:46:23 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src48_src.reg
[Thu Jun 21 14:46:23 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (93, 307) - (258, 472)
[Thu Jun 21 14:46:24 2012] XMMSAS bgd. selection expression = annulus(15227.146000, 33845.098000, 2393.660069, 4787.320138, X, Y) && !ellipse(14861.052000, 29382.944000, 1775.992051, 1775.992051, 0.000000, X, Y) && !ellipse(15296.170135, 28399.873413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13584.387200, 31930.994000, 2232.296064, 2232.296064, 0.000000, X, Y) && !ellipse(16781.458000, 28206.082000, 1644.904047, 1644.904047, 0.000000, X, Y) && !ellipse(14017.655800, 31394.492000, 1131.280033, 1131.280033, 0.000000, X, Y) && !ellipse(14439.607239, 32243.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17015.348068, 28642.450165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20320.274000, 36201.881200, 3591.808103, 3591.808103, 0.000000, X, Y) && !ellipse(14521.540000, 31048.952000, 2694.808078, 2694.808078, 0.000000, X, Y) && !ellipse(15346.002000, 30719.688000, 1831.160053, 1831.160053, 0.000000, X, Y) && !ellipse(21035.188000, 36591.001200, 1809.120052, 1809.120052, 0.000000, X, Y) && !ellipse(14329.201828, 32837.271667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20615.136000, 36244.856000, 3455.744099, 1387.952040, 0.000000, X, Y) && !ellipse(15137.173706, 31999.344421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21303.522000, 36338.049000, 1795.904052, 1795.904052, 0.000000, X, Y) && !ellipse(13489.116000, 32472.860000, 1963.344056, 1963.344056, 0.000000, X, Y) && !ellipse(17663.518800, 32253.772000, 1448.904042, 1448.904042, 0.000000, X, Y) && !ellipse(15201.778000, 32884.610000, 1875.584054, 1875.584054, 0.000000, X, Y) && !ellipse(11387.587341, 35240.885620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16679.214722, 38571.864136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15949.011307, 38937.748413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14004.495728, 33367.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12664.716171, 32137.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12429.033203, 34851.151215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12187.093658, 34307.788849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12674.761475, 33379.277313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13234.211990, 33336.037506, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src48.gif
[Thu Jun 21 15:04:13 2012] Mean detx,y = (-11395.11, -5936.62) 
[Thu Jun 21 15:04:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:04:57 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:04:58 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Jun 21 15:04:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu Jun 21 18:54:21 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:22 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Jun 21 18:54:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:25 2012] Using photon index=1.80, rate=0.00263, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src48.arf
[Thu Jun 21 18:54:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:26 2012] Updating source flux to 4.7e-14
[Thu Jun 21 19:07:42 2012] Flag c found in src. 48 procflags, skipping spectral fitting