[Wed Jun 20 03:36:14 2012] Detection parameters:
  Position = (270.1, 290.0) = 23 1 13.52 58 53 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 852.4 +/- 50.3
  Background counts = 174.9
  Rate = 0.02 +/- 0.001

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 2.14'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Jun 20 09:38:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.50"
[Wed Jun 20 15:29:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 20 15:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 15:29:23 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 20 15:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 15:29:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 20 15:29:25 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jun 20 15:30:13 2012] Source 2 is offset by 6.445002 and -5.345409 pixels which is larger than
2 X fitted extent = 0.863297 x 0.863297, not incorporating fit results
[Wed Jun 20 15:30:13 2012] Source 2 is offset by 7.022795 and -2.925133 pixels which is larger than
2 X fitted extent = 6.955816 x 6.955816, not incorporating fit results
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:30:14 2012] Source is confused with source 6
[Thu Jun 21 02:50:31 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Thu Jun 21 02:50:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.50"
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 21 08:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src4.csv
[Thu Jun 21 08:47:18 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 21 08:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src4.csv
[Thu Jun 21 08:47:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 21 08:47:20 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 4 centroid is now closest to src. 6
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:23 2012] XMMSAS src. selection expression = ellipse(23447.933136, 25184.059448, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 14:46:23 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 21 14:46:23 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (233, 253) - (308, 328)
[Thu Jun 21 14:46:23 2012] XMMSAS bgd. selection expression = annulus(23447.933136, 25184.059448, 1087.500000, 2175.000000, X, Y) && !ellipse(24299.764060, 24736.881000, 1579.569645, 1579.569645, 0.000000, X, Y) && !ellipse(24041.576000, 25103.816600, 1200.152035, 1200.152035, 0.000000, X, Y) && !ellipse(23287.832214, 23804.490295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25941.441071, 23874.139679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23452.381180, 27850.070600, 601.481617, 601.481617, 0.000000, X, Y) && !ellipse(23549.576000, 21747.214000, 1286.224037, 1286.224037, 0.000000, X, Y) && !ellipse(24093.880524, 23020.850433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.638397, 22321.855560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.976000, 26450.256000, 1116.488032, 1116.488032, 0.000000, X, Y) && !ellipse(23608.244000, 28017.366000, 1288.264037, 1288.264037, 0.000000, X, Y) && !ellipse(25341.282318, 28046.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.106689, 27340.731781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21684.364000, 27623.660000, 1289.328037, 1289.328037, 0.000000, X, Y)
[Thu Jun 21 14:46:23 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src2.gif
[Thu Jun 21 14:58:16 2012] Mean detx,y = (-760.04, -203.76) 
[Thu Jun 21 14:58:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 14:58:30 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 14:58:30 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 21 14:58:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 21 16:25:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 16:25:34 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:21 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:21 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 21 18:54:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:25 2012] Using photon index=1.80, rate=0.0175, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src2.arf
[Thu Jun 21 18:54:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:25 2012] Updating source flux to 1.7e-13
[Thu Jun 21 19:07:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting