[Wed Jun 20 03:36:17 2012] Detection parameters:
  Position = (264.4, 235.0) = 23 1 16.66 58 49 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.6 +/- 20.4
  Background counts = 150.1
  Rate = 0.002 +/- 0.0005

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 5.22'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Wed Jun 20 09:38:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.129
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 9.04"
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src90.ximg exists
[Wed Jun 20 15:29:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src90.csv
[Wed Jun 20 15:29:25 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src90_1.ximg exists
[Wed Jun 20 15:29:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src90.csv
[Wed Jun 20 15:29:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:27 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Wed Jun 20 15:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src90.csv
[Wed Jun 20 15:29:27 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Wed Jun 20 15:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src90.csv
[Wed Jun 20 15:29:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:30:14 2012] Spatial fit model total counts = 1587.520000, observed total counts = 1344.000000
[Wed Jun 20 15:30:14 2012] Poor agreement between spatial fit and data for source 112
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 02:50:31 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Thu Jun 21 02:50:31 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.129
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 9.04"
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src77.ximg exists
[Thu Jun 21 08:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src77.csv
[Thu Jun 21 08:47:20 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src77_1.ximg exists
[Thu Jun 21 08:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src77.csv
[Thu Jun 21 08:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:22 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Thu Jun 21 08:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Thu Jun 21 08:47:22 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Thu Jun 21 08:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Thu Jun 21 08:47:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:48:09 2012] Source 112 is offset by 7.807234 and -1.616656 pixels which is larger than
2 X fitted extent = 1.861389 x 1.861389, not incorporating fit results
[Thu Jun 21 08:48:10 2012] Spatial fit model total counts = 1588.150000, observed total counts = 1344.000000
[Thu Jun 21 08:48:10 2012] Poor agreement between spatial fit and data for source 112
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:27 2012] XMMSAS src. selection expression = ellipse(22955.701324, 20395.822968, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 14:46:27 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src112_src.reg
[Thu Jun 21 14:46:27 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (227, 197) - (302, 272)
[Thu Jun 21 14:46:27 2012] XMMSAS bgd. selection expression = annulus(22955.701324, 20395.822968, 1087.500000, 2175.000000, X, Y) && !ellipse(23792.265600, 18762.294600, 405.620012, 405.620012, 0.000000, X, Y) && !ellipse(23549.576000, 21747.214000, 1286.224037, 1286.224037, 0.000000, X, Y) && !ellipse(24093.880524, 23020.850433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21625.633865, 17974.539795, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23983.638397, 22321.855560, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 14:46:27 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src112.gif
[Thu Jun 21 16:00:45 2012] Mean detx,y = (19.05, 4496.74) 
[Thu Jun 21 16:00:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 16:00:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 16:00:56 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Thu Jun 21 16:00:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src112_bgd.pi.gz
[Thu Jun 21 18:33:12 2012] Not generating rmf since there are only 98 counts
[Thu Jun 21 18:33:12 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:24 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:24 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Thu Jun 21 18:54:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:28 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src112.arf
[Thu Jun 21 18:54:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:28 2012] Updating source flux to 3.2e-14
[Thu Jun 21 19:07:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting