[Wed Jun 20 03:36:17 2012] Detection parameters:
  Position = (269.9, 251.1) = 23 1 13.62 58 50 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.2 +/- 26.4
  Background counts = 158.8
  Rate = 0.005 +/- 0.0006

[Wed Jun 20 03:36:17 2012] Off-axis axis estimate = 4.01'
[Wed Jun 20 09:38:52 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 09:38:52 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Wed Jun 20 09:38:52 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.051
[Wed Jun 20 09:38:52 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 8.43"
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src37.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src37.csv
[Wed Jun 20 15:29:24 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Jun 20 15:29:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src37.csv
[Wed Jun 20 15:29:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Jun 20 15:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Wed Jun 20 15:29:26 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Jun 20 15:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Wed Jun 20 15:29:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:30:13 2012] Spatial fit model total counts = 2380.650000, observed total counts = 2152.000000
[Wed Jun 20 15:30:13 2012] Poor agreement between spatial fit and data for source 110
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 15:30:13 2012] Spatial fit model total counts = 1864.210000, observed total counts = 1867.000000
[Wed Jun 20 15:30:13 2012] Offset between fit and detection position for source 110 = 2.740706 pixels
[Wed Jun 20 15:30:13 2012] Warning, changing simple spatial fit ID from 37 to 44
[Wed Jun 20 15:30:13 2012] 1848.956500 total counts/ 1769.210000 bgd. counts: snr = 1.895928
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 2.740706 pixels
  Position = (272.6, 250.6) = 23 1 12.11 58 50 14.8
  Extent = 9.6 (4.1-17.2)", rotation angle = 0
  Source counts = 79.7 +/- 43.0
  Background counts = 1769.2
  Rate = 0.002 +/- 0.0009
[Wed Jun 20 15:30:14 2012] Spatial fit model total counts = 2657.670000, observed total counts = 2652.000000
[Wed Jun 20 15:30:14 2012] Offset between fit and detection position for source 110 = 1.406552 pixels
[Wed Jun 20 15:30:14 2012] Warning, changing simple spatial fit ID from 44 to 63
[Wed Jun 20 15:30:14 2012] 2692.769000 total counts/ 2412.210000 bgd. counts: snr = 5.712374
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 1.406552 pixels
  Position = (271.2, 250.9) = 23 1 12.88 58 50 16.2
  Extent = 16.2 (16.1-16.3)", rotation angle = 0
  Source counts = 280.6 +/- 51.9
  Background counts = 2412.2
  Rate = 0.006 +/- 0.001
[Wed Jun 20 15:30:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:30:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:30:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:30:14 2012] Source does appear to be extended
[Wed Jun 20 15:30:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:30:14 2012] Source is confused with source 111
[Wed Jun 20 15:30:14 2012] Source is confused with source 107
[Thu Jun 21 02:50:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 02:50:31 2012] Initial guess for spatial extent in simple fitting = 16.19"
[Thu Jun 21 02:50:31 2012] source mask rpix=3.7, npix_max = 71, mask sum = 64, frac = 0.897
[Thu Jun 21 02:50:31 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 16.19"
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src33.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 21 08:47:19 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Jun 21 08:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 21 08:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Jun 21 08:47:21 2012] fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Jun 21 08:47:21 2012] Fit fullrun_mos2_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Jun 21 08:48:09 2012] Warning, spatial fit 33 centroid is now closest to src. 112
[Thu Jun 21 08:48:10 2012] Spatial fit model total counts = 2661.760000, observed total counts = 2652.000000
[Thu Jun 21 08:48:10 2012] Offset between fit and detection position for source 110 = 0.355957 pixels
[Thu Jun 21 08:48:10 2012] Warning, changing simple spatial fit ID from 33 to 55
[Thu Jun 21 08:48:10 2012] 2718.870000 total counts/ 2478.190000 bgd. counts: snr = 4.834735
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.355957 pixels
  Position = (271.2, 250.5) = 23 1 12.85 58 50 14.6
  Extent = 16.1 (15.8-16.3)", rotation angle = 0
  Source counts = 240.7 +/- 52.1
  Background counts = 2478.2
  Rate = 0.005 +/- 0.001
[Thu Jun 21 08:48:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:48:10 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:48:10 2012] Source does appear to be extended
[Thu Jun 21 08:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 14:46:24 2012] XMMSAS src. selection expression = ellipse(23549.576000, 21747.214000, 964.668028, 964.668028, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing source region out to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src110_src.reg
[Thu Jun 21 14:46:24 2012] Extracting stamp from image fullrun_mos2_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (216, 195) - (327, 306)
[Thu Jun 21 14:46:24 2012] XMMSAS bgd. selection expression = annulus(23549.576000, 21747.214000, 1607.780046, 3215.560093, X, Y) && !ellipse(24299.764060, 24736.881000, 1579.569645, 1579.569645, 0.000000, X, Y) && !ellipse(24041.576000, 25103.816600, 1200.152035, 1200.152035, 0.000000, X, Y) && !ellipse(23447.933136, 25184.059448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23287.832214, 23804.490295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25941.441071, 23874.139679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23792.265600, 18762.294600, 405.620012, 405.620012, 0.000000, X, Y) && !ellipse(24093.880524, 23020.850433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21625.633865, 17974.539795, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(17906.928000, 25809.374760, 2997.536086, 2997.536086, 0.000000, X, Y) && !ellipse(23983.638397, 22321.855560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22955.701324, 20395.822968, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 14:46:24 2012] Writing fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src110.gif
[Thu Jun 21 15:23:56 2012] Mean detx,y = (147.98, 2992.97) 
[Thu Jun 21 15:23:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 15:24:14 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 15:24:15 2012] Setting source spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Thu Jun 21 15:24:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src110_bgd.pi.gz
[Thu Jun 21 18:54:22 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:22 2012] Error reading totcts from fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Thu Jun 21 18:54:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:27 2012] Using photon index=1.80, rate=0.00526, arf fullrun_mos2_xmm0038140101_pi300-10000_pass1_cl_src110.arf
[Thu Jun 21 18:54:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:27 2012] Updating source flux to 6e-14
[Thu Jun 21 19:07:42 2012] Flag p found in src. 110 procflags, skipping spectral fitting
[Thu Jun 21 19:07:42 2012] Flag c found in src. 110 procflags, skipping spectral fitting