[Wed Jun 20 03:35:15 2012] Detection parameters:
  Position = (258.7, 417.9) = 23 1 20.01 59 2 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 19.8
  Background counts = 134.4
  Rate = 0.004 +/- 0.0007

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 9.13'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 10.99"
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src65.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src65.csv
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src65_1.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src65.csv
[Wed Jun 20 09:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Wed Jun 20 09:38:51 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Wed Jun 20 15:29:53 2012] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 15.321148 pixels away
[Wed Jun 20 15:29:53 2012] Spatial fit model total counts = 1677.710000, observed total counts = 1678.000000
[Wed Jun 20 15:29:53 2012] Offset between fit and detection position for source 63 = 1.096530 pixels
[Wed Jun 20 15:29:53 2012] Warning, changing simple spatial fit ID from 65 to 69
[Wed Jun 20 15:29:53 2012] 1678.474900 total counts/ 1660.100000 bgd. counts: snr = 0.450981
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.096530 pixels
  Position = (259.0, 416.8) = 23 1 19.83 59 2 18.0
  Extent = 15.3" x 1.9", rotation angle = 89
  Source counts = 18.4 +/- 41.0
  Background counts = 1660.1
  Rate = 0.0004 +/- 0.0009
  Deleting source due to low Poisson probability