[Wed Jun 20 03:35:14 2012] Detection parameters:
  Position = (194.6, 339.0) = 23 1 55.97 58 56 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.4 +/- 23.5
  Background counts = 258.6
  Rate = 0.007 +/- 0.0008

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 8.08'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.947
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.47"
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Jun 20 09:38:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src21.csv
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Jun 20 09:38:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src21.csv
[Wed Jun 20 09:38:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Jun 20 09:38:50 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Jun 20 15:29:53 2012] Spatial fit model total counts = 3506.580000, observed total counts = 3515.000000
[Wed Jun 20 15:29:53 2012] Offset between fit and detection position for source 32 = 1.282338 pixels
[Wed Jun 20 15:29:53 2012] Warning, changing simple spatial fit ID from 21 to 17
[Wed Jun 20 15:29:53 2012] 3291.127440 total counts/ 3282.120000 bgd. counts: snr = 0.157226
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 1.282338 pixels
  Position = (195.8, 338.5) = 23 1 55.30 58 56 36.8
  Extent = 2.7 (2.7-4.2)", rotation angle = 0
  Source counts = 9.0 +/- 57.4
  Background counts = 3282.1
  Rate = 0.0002 +/- 0.001
  Deleting source due to low Poisson probability