[Wed Jun 20 03:35:14 2012] Detection parameters:
  Position = (173.6, 355.0) = 23 2 7.83 58 57 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.3 +/- 26.3
  Background counts = 236.1
  Rate = 0.006 +/- 0.0009

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 9.94'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.079
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 11.40"
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src29.ximg exists
[Wed Jun 20 09:38:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src29.csv
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Jun 20 09:38:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src29.csv
[Wed Jun 20 09:38:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Jun 20 09:38:50 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Jun 20 15:29:53 2012] Spatial fit model total counts = 2689.010000, observed total counts = 2688.000000
[Wed Jun 20 15:29:53 2012] Offset between fit and detection position for source 31 = 2.741934 pixels
[Wed Jun 20 15:29:53 2012] Warning, changing simple spatial fit ID from 29 to 26
[Wed Jun 20 15:29:53 2012] 2632.783100 total counts/ 2595.980000 bgd. counts: snr = 0.722327
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.741934 pixels
  Position = (175.1, 352.7) = 23 2 6.97 58 57 38.2
  Extent = 20.8 (15.1-23.6)" x 7.4 (4.2-9.0)", rotation angle = 88 (76-130) degrees
  Source counts = 36.8 +/- 51.3
  Background counts = 2596.0
  Rate = 0.0008 +/- 0.001
  Deleting source due to low Poisson probability