[Wed Jun 20 03:35:13 2012] Detection parameters:
  Position = (190.0, 307.3) = 23 1 58.50 58 54 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 438.6 +/- 31.0
  Background counts = 278.3
  Rate = 0.01 +/- 0.001

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 7.89'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.721
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.37"
[Wed Jun 20 09:38:47 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 20 09:38:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src5.csv
[Wed Jun 20 09:38:47 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 20 09:38:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src5.csv
[Wed Jun 20 09:38:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 20 09:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:53 2012] Source 3 is offset by 0.154246 and 4.399424 pixels which is larger than
2 X fitted extent = 1.231563 x 1.231563, not incorporating fit results
[Wed Jun 20 15:29:53 2012] Warning, spatial fit 5 centroid is now closest to src. 46
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:53 2012] Source is confused with source 43
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Wed Jun 20 15:41:50 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.721
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.37"
[Thu Jun 21 02:50:21 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 21 02:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 21 02:50:21 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 21 02:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 21 02:50:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 21 02:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:48 2012] Source 3 is offset by 0.154246 and 4.399424 pixels which is larger than
2 X fitted extent = 1.231563 x 1.231563, not incorporating fit results
[Thu Jun 21 08:47:48 2012] Warning, spatial fit 5 centroid is now closest to src. 41
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:56 2012] XMMSAS src. selection expression = ellipse(16482.089417, 26682.419922, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 09:33:56 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 21 09:33:56 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (153, 270) - (228, 345)
[Thu Jun 21 09:33:56 2012] XMMSAS bgd. selection expression = annulus(16482.089417, 26682.419922, 1087.500000, 2175.000000, X, Y) && !ellipse(15645.246750, 25337.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15166.367081, 29013.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.378000, 27981.952600, 561.224016, 561.224016, 0.000000, X, Y) && !ellipse(17400.882000, 27524.226000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(16209.754000, 28130.968000, 3548.688102, 3548.688102, 0.000000, X, Y) && !ellipse(16560.564000, 28940.246000, 1444.608042, 1444.608042, 0.000000, X, Y) && !ellipse(15695.846000, 28242.946000, 1708.344049, 1708.344049, 0.000000, X, Y) && !ellipse(17691.108780, 27080.252167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17284.278000, 25958.471800, 1628.848047, 1628.848047, 0.000000, X, Y) && !ellipse(16992.769699, 26440.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15487.413223, 26956.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.078049, 25798.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.322800, 26331.297607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14452.403152, 26366.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18217.620000, 24037.666000, 1526.192044, 1526.192044, 0.000000, X, Y) && !ellipse(16217.186523, 29178.917419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14747.735336, 26843.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15726.765200, 24485.795800, 722.816021, 722.816021, 0.000000, X, Y) && !ellipse(18246.768800, 25403.609400, 1533.464044, 1533.464044, 0.000000, X, Y) && !ellipse(17287.905411, 24949.304413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18400.136000, 25633.364000, 1455.984042, 1455.984042, 0.000000, X, Y) && !ellipse(16984.336000, 30503.694000, 1701.888049, 587.473617, 90.000000, X, Y) && !ellipse(13769.753800, 26768.954400, 848.096024, 848.096024, 0.000000, X, Y) && !ellipse(14843.775711, 25809.013519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13836.091202, 27479.600433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16589.488000, 29578.424000, 2071.856060, 2071.856060, 0.000000, X, Y) && !ellipse(16912.914383, 27965.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17175.002000, 28484.914000, 1621.608047, 1621.608047, 0.000000, X, Y) && !ellipse(14762.382000, 29456.502000, 1774.344051, 1774.344051, 0.000000, X, Y) && !ellipse(13789.270000, 25740.662000, 966.584028, 966.584028, 0.000000, X, Y) && !ellipse(14276.176910, 23963.638062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16766.697937, 24757.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14345.950000, 25353.258000, 1766.720051, 1766.720051, 0.000000, X, Y) && !ellipse(18551.537399, 26834.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18781.889069, 23718.536377, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13661.175217, 24663.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14067.771400, 23781.132000, 1815.360052, 1815.360052, 0.000000, X, Y) && !ellipse(19068.395935, 25973.617371, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:56 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src3.gif
[Thu Jun 21 09:40:52 2012] Mean detx,y = (580.11, 7870.19) 
[Thu Jun 21 09:40:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 09:41:11 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 09:41:11 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 21 09:41:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 21 11:45:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 11:45:06 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:09 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:09 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 21 18:54:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:14 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src3.arf
[Thu Jun 21 18:54:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:14 2012] Updating source flux to 2e-13
[Thu Jun 21 18:54:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting