[Wed Jun 20 03:35:13 2012] Detection parameters:
  Position = (180.4, 291.8) = 23 2 3.86 58 53 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2808.8 +/- 673.0
  Background counts = 232.8
  Rate = 0.09 +/- 0.02

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 8.57'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.5, npix_max = 35, mask sum = 18, frac = 0.513
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.71"
[Wed Jun 20 09:38:47 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 20 09:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src2.csv
[Wed Jun 20 09:38:47 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 20 09:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src2.csv
[Wed Jun 20 09:38:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 20 09:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:53 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Wed Jun 20 15:29:53 2012] Source 2 is offset by -6.638865 and -0.163633 pixels which is larger than
2 X fitted extent = 3.468175 x 1.523678, not incorporating fit results
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:53 2012] Source is confused with source 108
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jun 20 15:41:50 2012] source mask rpix=2.5, npix_max = 35, mask sum = 18, frac = 0.513
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.71"
[Thu Jun 21 02:50:21 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 21 02:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 21 02:50:21 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 21 02:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 21 02:50:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 21 02:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:48 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:55 2012] Counts = 2808.793213, rescaling region sizes by 2.000000
[Thu Jun 21 09:33:55 2012] XMMSAS src. selection expression = ellipse(15645.246750, 25337.559967, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:55 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 21 09:33:55 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (105, 217) - (255, 367)
[Thu Jun 21 09:33:55 2012] XMMSAS bgd. selection expression = annulus(15645.246750, 25337.559967, 4350.000000, 8700.000000, X, Y) && !ellipse(24293.269200, 24733.015620, 1590.064846, 1590.064846, 0.000000, X, Y) && !ellipse(16482.089417, 26682.419922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15166.367081, 29013.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12941.536163, 26738.539276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.378000, 27981.952600, 561.224016, 561.224016, 0.000000, X, Y) && !ellipse(17400.882000, 27524.226000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(16209.754000, 28130.968000, 3548.688102, 3548.688102, 0.000000, X, Y) && !ellipse(16560.564000, 28940.246000, 1444.608042, 1444.608042, 0.000000, X, Y) && !ellipse(15695.846000, 28242.946000, 1708.344049, 1708.344049, 0.000000, X, Y) && !ellipse(17691.108780, 27080.252167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17284.278000, 25958.471800, 1628.848047, 1628.848047, 0.000000, X, Y) && !ellipse(16992.769699, 26440.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15487.413223, 26956.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.078049, 25798.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.322800, 26331.297607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14147.132200, 31549.336000, 1890.824054, 1890.824054, 0.000000, X, Y) && !ellipse(14452.403152, 26366.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18217.620000, 24037.666000, 1526.192044, 1526.192044, 0.000000, X, Y) && !ellipse(14896.041290, 22068.606918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16217.186523, 29178.917419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14747.735336, 26843.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15726.765200, 24485.795800, 722.816021, 722.816021, 0.000000, X, Y) && !ellipse(16717.188278, 30828.580048, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18246.768800, 25403.609400, 1533.464044, 1533.464044, 0.000000, X, Y) && !ellipse(17287.905411, 24949.304413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18400.136000, 25633.364000, 1455.984042, 1455.984042, 0.000000, X, Y) && !ellipse(23976.990204, 21244.177841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16984.336000, 30503.694000, 1701.888049, 587.473617, 90.000000, X, Y) && !ellipse(13769.753800, 26768.954400, 848.096024, 848.096024, 0.000000, X, Y) && !ellipse(14843.775711, 25809.013519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13836.091202, 27479.600433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16589.488000, 29578.424000, 2071.856060, 2071.856060, 0.000000, X, Y) && !ellipse(16197.523600, 30100.974000, 1035.928030, 1035.928030, 0.000000, X, Y) && !ellipse(15829.000000, 23414.920502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.797800, 22600.616000, 800.488023, 800.488023, 0.000000, X, Y) && !ellipse(23311.919600, 22908.785800, 770.519222, 770.519222, 0.000000, X, Y) && !ellipse(23802.169800, 18780.078339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23315.144501, 21469.016342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21557.730000, 14570.332000, 3598.624104, 3598.624104, 0.000000, X, Y) && !ellipse(16912.914383, 27965.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23070.491516, 22321.422791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15327.407883, 31529.948517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17175.002000, 28484.914000, 1621.608047, 1621.608047, 0.000000, X, Y) && !ellipse(17678.178787, 32237.500549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14762.382000, 29456.502000, 1774.344051, 1774.344051, 0.000000, X, Y) && !ellipse(13789.270000, 25740.662000, 966.584028, 966.584028, 0.000000, X, Y) && !ellipse(13548.242000, 19486.782000, 1749.656050, 1749.656050, 0.000000, X, Y) && !ellipse(23547.475494, 21882.997803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14276.176910, 23963.638062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16766.697937, 24757.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23391.933000, 27188.432000, 1220.480035, 1220.480035, 0.000000, X, Y) && !ellipse(14345.950000, 25353.258000, 1766.720051, 1766.720051, 0.000000, X, Y) && !ellipse(22255.940000, 15431.970000, 1799.312052, 1799.312052, 0.000000, X, Y) && !ellipse(22233.201477, 16126.237167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14046.565200, 18996.324000, 1935.632056, 1935.632056, 0.000000, X, Y) && !ellipse(23974.959400, 22197.590000, 1270.720037, 1270.720037, 0.000000, X, Y) && !ellipse(18551.537399, 26834.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18781.889069, 23718.536377, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13661.175217, 24663.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22693.835785, 17436.900345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22165.358000, 16968.736000, 1633.240047, 1633.240047, 0.000000, X, Y) && !ellipse(25043.369446, 22420.436798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14067.771400, 23781.132000, 1815.360052, 1815.360052, 0.000000, X, Y) && !ellipse(19068.395935, 25973.617371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16001.280000, 34045.418600, 1903.624055, 1903.624055, 0.000000, X, Y) && !ellipse(13799.922000, 19057.862880, 3067.760088, 1871.600054, 242.835000, X, Y) && !ellipse(23489.664000, 27576.684000, 1216.568035, 693.252820, 123.009000, X, Y) && !ellipse(23662.865200, 28528.136000, 1259.576036, 1259.576036, 0.000000, X, Y) && !ellipse(13819.938004, 31695.240021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16411.008972, 23325.692932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14038.977921, 31037.031708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22263.989197, 24074.724487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14153.014084, 33116.100189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.879547, 27000.168518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22263.358000, 24901.851000, 1299.728037, 218.579206, 4.688000, X, Y) && !ellipse(13678.459457, 30953.491211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14033.075790, 32247.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12809.266586, 32201.094788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24784.443024, 22596.701538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22874.085724, 21880.602966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14275.441467, 32049.120911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15096.603531, 30415.938049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14825.440079, 32851.821228, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:55 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src2.gif
[Thu Jun 21 09:37:59 2012] Mean detx,y = (1975.73, 8328.70) 
[Thu Jun 21 09:38:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 09:40:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 09:40:15 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 21 09:40:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 21 11:37:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 11:37:59 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:09 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:09 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 21 18:54:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:14 2012] Using photon index=1.80, rate=0.088, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src2.arf
[Thu Jun 21 18:54:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:14 2012] Updating source flux to 1.1e-12
[Thu Jun 21 18:54:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting