[Wed Jun 20 03:35:14 2012] Detection parameters:
  Position = (196.9, 142.1) = 23 1 54.28 58 42 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.3 +/- 23.4
  Background counts = 112.9
  Rate = 0.004 +/- 0.0005

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 13.52'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Wed Jun 20 04:12:48 2012] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.962
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 13.19"
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src61.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src61.csv
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src61_1.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src61.csv
[Wed Jun 20 09:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Wed Jun 20 09:38:51 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Wed Jun 20 15:29:53 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 17.173417 pixels away
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Wed Jun 20 15:41:50 2012] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.962
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 13.19"
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src57.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src57.csv
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src57_1.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src57.csv
[Thu Jun 21 02:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Thu Jun 21 02:50:30 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Thu Jun 21 08:47:48 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 17.764003 pixels away
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:59 2012] XMMSAS src. selection expression = ellipse(17084.009781, 12310.308258, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src18_src.reg
[Thu Jun 21 09:33:59 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (159, 105) - (234, 180)
[Thu Jun 21 09:33:59 2012] XMMSAS bgd. selection expression = annulus(17084.009781, 12310.308258, 1087.500000, 2175.000000, X, Y) && !ellipse(21557.730000, 14570.332000, 3598.624104, 3598.624104, 0.000000, X, Y) && !ellipse(16928.282140, 10636.504220, 990.200028, 990.200028, 0.000000, X, Y) && !ellipse(14288.298447, 11957.793381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14819.775574, 11701.811386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17000.997635, 10415.039490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14351.606293, 12548.545364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16044.645462, 11264.680725, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src18.gif
[Thu Jun 21 10:42:44 2012] Mean detx,y = (14144.66, 3249.34) 
[Thu Jun 21 10:42:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 10:43:11 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 10:43:12 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jun 21 10:43:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jun 21 13:18:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 13:18:58 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:11 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:11 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jun 21 18:54:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:18 2012] Using photon index=1.80, rate=0.00363, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src18.arf
[Thu Jun 21 18:54:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:19 2012] Updating source flux to 8.1e-14
[Thu Jun 21 18:54:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting