[Wed Jun 20 03:35:14 2012] Detection parameters:
  Position = (200.7, 301.9) = 23 1 52.50 58 53 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 372.7 +/- 33.0
  Background counts = 260.1
  Rate = 0.009 +/- 0.0008

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 7.09'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.97"
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jun 20 09:38:48 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src16 appears to have run properly
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Jun 20 09:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:53 2012] Warning, spatial fit 16 centroid is now closest to src. 16
[Wed Jun 20 15:29:53 2012] Spatial fit model total counts = 2971.120000, observed total counts = 3658.000000
[Wed Jun 20 15:29:53 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 15:29:53 2012] Source 17 is offset by -0.700266 and 5.145618 pixels which is larger than
2 X fitted extent = 4.736414 x 4.736414, not incorporating fit results
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:53 2012] Source is confused with source 43
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Wed Jun 20 15:41:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.97"
[Thu Jun 21 02:50:22 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jun 21 02:50:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src16.csv
[Thu Jun 21 02:50:22 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jun 21 02:50:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src16.csv
[Thu Jun 21 02:50:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jun 21 02:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:48 2012] Warning, spatial fit 16 centroid is now closest to src. 106
[Thu Jun 21 08:47:48 2012] Spatial fit model total counts = 3730.710000, observed total counts = 3555.000000
[Thu Jun 21 08:47:48 2012] Offset between fit and detection position for source 17 = 3.336397 pixels
[Thu Jun 21 08:47:48 2012] Warning, changing simple spatial fit ID from 16 to 21
[Thu Jun 21 08:47:48 2012] 3504.377000 total counts/ 2655.380000 bgd. counts: snr = 16.475660
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.336397 pixels
  Position = (199.2, 298.9) = 23 1 53.30 58 53 44.5
  Extent = 20.4 (14.8-40.7)", rotation angle = 0
  Source counts = 849.0 +/- 59.2
  Background counts = 2655.4
  Rate = 0.02 +/- 0.001
[Thu Jun 21 08:47:48 2012] Spatial fit model total counts = 15467.300000, observed total counts = 13334.000000
[Thu Jun 21 08:47:48 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:56 2012] XMMSAS src. selection expression = ellipse(17284.278000, 25958.471800, 1221.636035, 1221.636035, 0.000000, X, Y)
[Thu Jun 21 09:33:56 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src17_src.reg
[Thu Jun 21 09:33:56 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (129, 229) - (269, 369)
[Thu Jun 21 09:33:56 2012] XMMSAS bgd. selection expression = annulus(17284.278000, 25958.471800, 2036.060059, 4072.120117, X, Y) && !ellipse(15645.246750, 25337.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16482.089417, 26682.419922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15166.367081, 29013.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12941.536163, 26738.539276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.378000, 27981.952600, 561.224016, 561.224016, 0.000000, X, Y) && !ellipse(17400.882000, 27524.226000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(16209.754000, 28130.968000, 3548.688102, 3548.688102, 0.000000, X, Y) && !ellipse(16560.564000, 28940.246000, 1444.608042, 1444.608042, 0.000000, X, Y) && !ellipse(15695.846000, 28242.946000, 1708.344049, 1708.344049, 0.000000, X, Y) && !ellipse(17691.108780, 27080.252167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16992.769699, 26440.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15487.413223, 26956.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.078049, 25798.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.322800, 26331.297607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14147.132200, 31549.336000, 1890.824054, 1890.824054, 0.000000, X, Y) && !ellipse(14452.403152, 26366.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18217.620000, 24037.666000, 1526.192044, 1526.192044, 0.000000, X, Y) && !ellipse(14896.041290, 22068.606918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16217.186523, 29178.917419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14747.735336, 26843.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15726.765200, 24485.795800, 722.816021, 722.816021, 0.000000, X, Y) && !ellipse(16717.188278, 30828.580048, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18246.768800, 25403.609400, 1533.464044, 1533.464044, 0.000000, X, Y) && !ellipse(17287.905411, 24949.304413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18400.136000, 25633.364000, 1455.984042, 1455.984042, 0.000000, X, Y) && !ellipse(16984.336000, 30503.694000, 1701.888049, 587.473617, 90.000000, X, Y) && !ellipse(13769.753800, 26768.954400, 848.096024, 848.096024, 0.000000, X, Y) && !ellipse(14843.775711, 25809.013519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13836.091202, 27479.600433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16589.488000, 29578.424000, 2071.856060, 2071.856060, 0.000000, X, Y) && !ellipse(16197.523600, 30100.974000, 1035.928030, 1035.928030, 0.000000, X, Y) && !ellipse(15829.000000, 23414.920502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.914383, 27965.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17175.002000, 28484.914000, 1621.608047, 1621.608047, 0.000000, X, Y) && !ellipse(14762.382000, 29456.502000, 1774.344051, 1774.344051, 0.000000, X, Y) && !ellipse(13789.270000, 25740.662000, 966.584028, 966.584028, 0.000000, X, Y) && !ellipse(14276.176910, 23963.638062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16766.697937, 24757.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14345.950000, 25353.258000, 1766.720051, 1766.720051, 0.000000, X, Y) && !ellipse(18551.537399, 26834.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18781.889069, 23718.536377, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13661.175217, 24663.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14067.771400, 23781.132000, 1815.360052, 1815.360052, 0.000000, X, Y) && !ellipse(19068.395935, 25973.617371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13799.922000, 19057.862880, 3067.760088, 1871.600054, 242.835000, X, Y) && !ellipse(16411.008972, 23325.692932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22263.358000, 24901.851000, 1299.728037, 218.579206, 4.688000, X, Y) && !ellipse(15096.603531, 30415.938049, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:56 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src17.gif
[Thu Jun 21 09:53:27 2012] Mean detx,y = (987.24, 6986.66) 
[Thu Jun 21 09:53:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 09:54:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 09:54:04 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jun 21 09:54:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jun 21 18:54:10 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:10 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jun 21 18:54:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:14 2012] Using photon index=1.80, rate=0.0186, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src17.arf
[Thu Jun 21 18:54:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:14 2012] Updating source flux to 2.1e-13
[Thu Jun 21 18:54:31 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Thu Jun 21 18:54:31 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Thu Jun 21 18:54:31 2012] Flag c found in src. 17 procflags, skipping spectral fitting