[Wed Jun 20 03:35:16 2012] Detection parameters:
  Position = (274.1, 216.4) = 23 1 11.20 58 47 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.7 +/- 22.6
  Background counts = 148.1
  Rate = 0.004 +/- 0.0006

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 6.20'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 9.53"
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src48.ximg exists
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed Jun 20 09:38:48 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src48 appears to have run properly
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed Jun 20 09:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed Jun 20 09:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Wed Jun 20 09:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:53 2012] Spatial fit model total counts = 1383.170000, observed total counts = 1255.000000
[Wed Jun 20 15:29:53 2012] Poor agreement between spatial fit and data for source 129
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Wed Jun 20 15:41:50 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 9.53"
[Thu Jun 21 02:50:23 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src44.ximg exists
[Thu Jun 21 02:50:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src44.csv
[Thu Jun 21 02:50:23 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu Jun 21 02:50:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src44.csv
[Thu Jun 21 02:50:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:28 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu Jun 21 02:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu Jun 21 02:50:28 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu Jun 21 02:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu Jun 21 02:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:48 2012] Spatial fit model total counts = 1383.350000, observed total counts = 1255.000000
[Thu Jun 21 08:47:48 2012] Poor agreement between spatial fit and data for source 129
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:58 2012] XMMSAS src. selection expression = ellipse(23802.169800, 18780.078339, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 09:33:58 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src129_src.reg
[Thu Jun 21 09:33:58 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (237, 179) - (312, 254)
[Thu Jun 21 09:33:58 2012] XMMSAS bgd. selection expression = annulus(23802.169800, 18780.078339, 1087.500000, 2175.000000, X, Y) && !ellipse(23976.990204, 21244.177841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23315.144501, 21469.016342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21557.730000, 14570.332000, 3598.624104, 3598.624104, 0.000000, X, Y) && !ellipse(22255.940000, 15431.970000, 1799.312052, 1799.312052, 0.000000, X, Y) && !ellipse(22233.201477, 16126.237167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23974.959400, 22197.590000, 1270.720037, 1270.720037, 0.000000, X, Y) && !ellipse(22693.835785, 17436.900345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22165.358000, 16968.736000, 1633.240047, 1633.240047, 0.000000, X, Y)
[Thu Jun 21 09:33:58 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src129.gif
[Thu Jun 21 10:16:51 2012] Mean detx,y = (6017.44, -1317.85) 
[Thu Jun 21 10:16:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 10:17:31 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 10:17:32 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src129_src_b10.pi.gz
[Thu Jun 21 10:17:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src129_bgd.pi.gz
[Thu Jun 21 12:59:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 12:59:41 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:10 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:10 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src129_src_b10.pi.gz
[Thu Jun 21 18:54:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:18 2012] Using photon index=1.80, rate=0.00438, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src129.arf
[Thu Jun 21 18:54:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:18 2012] Updating source flux to 5.5e-14
[Thu Jun 21 18:54:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting