[Wed Jun 20 03:35:16 2012] Detection parameters:
  Position = (160.7, 223.8) = 23 2 14.73 58 48 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.2 +/- 19.6
  Background counts = 106.0
  Rate = 0.004 +/- 0.0007

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 11.36'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 12.11"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 12.11"
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src63.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src63.csv
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src63.csv
[Wed Jun 20 09:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Jun 20 09:38:51 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Wed Jun 20 15:29:53 2012] Warning, spatial fit 63 centroid is now closest to src. 128
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:53 2012] Source is confused with source 128
[Wed Jun 20 15:29:53 2012] Source is confused with source 131
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 12.11"
[Wed Jun 20 15:41:50 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 12.11"
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src59.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src59.csv
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src59.csv
[Thu Jun 21 02:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu Jun 21 02:50:30 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu Jun 21 08:47:48 2012] Warning, spatial fit 59 centroid is now closest to src. 128
[Thu Jun 21 08:47:48 2012] Spatial fit model total counts = 4502.660000, observed total counts = 4487.000000
[Thu Jun 21 08:47:48 2012] Offset between fit and detection position for source 127 = 4.471121 pixels
[Thu Jun 21 08:47:48 2012] Warning, changing simple spatial fit ID from 59 to 86
[Thu Jun 21 08:47:48 2012] 4163.263000 total counts/ 3944.950000 bgd. counts: snr = 3.475833
Spatial fit parameters:
  Offset between fit and detection position for source 127 = 4.471121 pixels
  Position = (156.3, 224.5) = 23 2 17.20 58 48 20.1
  Extent = 21.9 (15.0-37.3)", rotation angle = 0
  Source counts = 218.3 +/- 64.5
  Background counts = 3944.9
  Rate = 0.005 +/- 0.001
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:59 2012] XMMSAS src. selection expression = ellipse(13548.242000, 19486.782000, 1312.242038, 1312.242038, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src127_src.reg
[Thu Jun 21 09:33:59 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (81, 149) - (232, 300)
[Thu Jun 21 09:33:59 2012] XMMSAS bgd. selection expression = annulus(13548.242000, 19486.782000, 2187.070063, 4374.140126, X, Y) && !ellipse(18217.620000, 24037.666000, 1526.192044, 1526.192044, 0.000000, X, Y) && !ellipse(14896.041290, 22068.606918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15726.765200, 24485.795800, 722.816021, 722.816021, 0.000000, X, Y) && !ellipse(15829.000000, 23414.920502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14276.176910, 23963.638062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14345.950000, 25353.258000, 1766.720051, 1766.720051, 0.000000, X, Y) && !ellipse(14046.565200, 18996.324000, 1935.632056, 1935.632056, 0.000000, X, Y) && !ellipse(18781.889069, 23718.536377, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13661.175217, 24663.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14067.771400, 23781.132000, 1815.360052, 1815.360052, 0.000000, X, Y) && !ellipse(13799.922000, 19057.862880, 3067.760088, 1871.600054, 242.835000, X, Y) && !ellipse(16411.008972, 23325.692932, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src127.gif
[Thu Jun 21 10:43:59 2012] Mean detx,y = (8300.45, 8596.31) 
[Thu Jun 21 10:44:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 10:45:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 10:45:07 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src127_src_b10.pi.gz
[Thu Jun 21 10:45:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src127_bgd.pi.gz
[Thu Jun 21 18:54:11 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:11 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src127_src_b10.pi.gz
[Thu Jun 21 18:54:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:19 2012] Using photon index=1.80, rate=0.00478, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src127.arf
[Thu Jun 21 18:54:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:19 2012] Updating source flux to 7.1e-14
[Thu Jun 21 18:54:31 2012] Flag c found in src. 127 procflags, skipping spectral fitting