[Wed Jun 20 03:35:16 2012] Detection parameters:
  Position = (164.7, 276.0) = 23 2 12.65 58 51 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.2 +/- 24.3
  Background counts = 185.6
  Rate = 0.003 +/- 0.0007

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 9.83'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 11.35"
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src67.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src67.csv
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src67_1.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src67.csv
[Wed Jun 20 09:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Wed Jun 20 09:38:51 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Wed Jun 20 09:38:52 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Wed Jun 20 15:29:53 2012] Warning, spatial fit 67 centroid is now closest to src. 113
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:53 2012] Source is confused with source 113
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Wed Jun 20 15:41:50 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 11.35"
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src61.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src61.csv
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src61_1.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src61.csv
[Thu Jun 21 02:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Thu Jun 21 02:50:30 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Thu Jun 21 08:47:48 2012] Source 111 is offset by -6.715116 and -1.619569 pixels which is larger than
2 X fitted extent = 2.203954 x 2.203954, not incorporating fit results
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:59 2012] XMMSAS src. selection expression = ellipse(14276.176910, 23963.638062, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src111_src.reg
[Thu Jun 21 09:33:59 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (127, 239) - (202, 314)
[Thu Jun 21 09:33:59 2012] XMMSAS bgd. selection expression = annulus(14276.176910, 23963.638062, 1087.500000, 2175.000000, X, Y) && !ellipse(15645.246750, 25337.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16482.089417, 26682.419922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12941.536163, 26738.539276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16209.754000, 28130.968000, 3548.688102, 3548.688102, 0.000000, X, Y) && !ellipse(17284.278000, 25958.471800, 1628.848047, 1628.848047, 0.000000, X, Y) && !ellipse(16992.769699, 26440.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15487.413223, 26956.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.078049, 25798.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.322800, 26331.297607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14452.403152, 26366.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14896.041290, 22068.606918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14747.735336, 26843.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15726.765200, 24485.795800, 722.816021, 722.816021, 0.000000, X, Y) && !ellipse(17287.905411, 24949.304413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13769.753800, 26768.954400, 848.096024, 848.096024, 0.000000, X, Y) && !ellipse(14843.775711, 25809.013519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15829.000000, 23414.920502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13789.270000, 25740.662000, 966.584028, 966.584028, 0.000000, X, Y) && !ellipse(16766.697937, 24757.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14345.950000, 25353.258000, 1766.720051, 1766.720051, 0.000000, X, Y) && !ellipse(13661.175217, 24663.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14067.771400, 23781.132000, 1815.360052, 1815.360052, 0.000000, X, Y) && !ellipse(13799.922000, 19057.862880, 3067.760088, 1871.600054, 242.835000, X, Y) && !ellipse(16411.008972, 23325.692932, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src111.gif
[Thu Jun 21 10:45:58 2012] Mean detx,y = (3754.13, 9254.68) 
[Thu Jun 21 10:46:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 10:46:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 10:46:29 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Thu Jun 21 10:46:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src111_bgd.pi.gz
[Thu Jun 21 13:23:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 13:23:18 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:54:11 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:11 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Thu Jun 21 18:54:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:19 2012] Using photon index=1.80, rate=0.0035, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src111.arf
[Thu Jun 21 18:54:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:19 2012] Updating source flux to 5.1e-14
[Thu Jun 21 18:54:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting