[Wed Jun 20 03:35:14 2012] Detection parameters:
  Position = (195.7, 314.9) = 23 1 55.33 58 54 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 346.8 +/- 26.9
  Background counts = 214.1
  Rate = 0.01 +/- 0.0008

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 7.55'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.803
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.20"
[Wed Jun 20 09:38:47 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 20 09:38:48 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 20 09:38:48 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src11 appears to have run properly
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 09:38:50 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 20 09:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 09:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:29:53 2012] Warning, spatial fit 11 centroid is now closest to src. 15
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:53 2012] Source is confused with source 38
[Wed Jun 20 15:29:53 2012] Source is confused with source 37
[Wed Jun 20 15:41:50 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Wed Jun 20 15:41:50 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.803
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.20"
[Thu Jun 21 02:50:22 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 21 02:50:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 02:50:22 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 21 02:50:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 02:50:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 02:50:27 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 21 02:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 02:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:47:48 2012] Warning, spatial fit 11 centroid is now closest to src. 15
[Thu Jun 21 08:47:48 2012] Spatial fit model total counts = 3067.720000, observed total counts = 3113.000000
[Thu Jun 21 08:47:48 2012] Offset between fit and detection position for source 11 = 5.283724 pixels
[Thu Jun 21 08:47:48 2012] Warning, changing simple spatial fit ID from 11 to 49
[Thu Jun 21 08:47:48 2012] 2969.217000 total counts/ 2666.260000 bgd. counts: snr = 5.867184
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 5.283724 pixels
  Position = (200.6, 316.9) = 23 1 52.58 58 55 2.8
  Extent = 15.4 (10.5-20.6)", rotation angle = 0
  Source counts = 303.0 +/- 54.5
  Background counts = 2666.3
  Rate = 0.007 +/- 0.001
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:56 2012] XMMSAS src. selection expression = ellipse(17400.882000, 27524.226000, 926.526027, 926.526027, 0.000000, X, Y)
[Thu Jun 21 09:33:56 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 21 09:33:56 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (147, 264) - (254, 370)
[Thu Jun 21 09:33:56 2012] XMMSAS bgd. selection expression = annulus(17400.882000, 27524.226000, 1544.210044, 3088.420089, X, Y) && !ellipse(15645.246750, 25337.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16482.089417, 26682.419922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15166.367081, 29013.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.378000, 27981.952600, 561.224016, 561.224016, 0.000000, X, Y) && !ellipse(16209.754000, 28130.968000, 3548.688102, 3548.688102, 0.000000, X, Y) && !ellipse(16560.564000, 28940.246000, 1444.608042, 1444.608042, 0.000000, X, Y) && !ellipse(15695.846000, 28242.946000, 1708.344049, 1708.344049, 0.000000, X, Y) && !ellipse(17691.108780, 27080.252167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17284.278000, 25958.471800, 1628.848047, 1628.848047, 0.000000, X, Y) && !ellipse(16992.769699, 26440.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15487.413223, 26956.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.078049, 25798.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.322800, 26331.297607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14147.132200, 31549.336000, 1890.824054, 1890.824054, 0.000000, X, Y) && !ellipse(14452.403152, 26366.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18217.620000, 24037.666000, 1526.192044, 1526.192044, 0.000000, X, Y) && !ellipse(16217.186523, 29178.917419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14747.735336, 26843.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15726.765200, 24485.795800, 722.816021, 722.816021, 0.000000, X, Y) && !ellipse(16717.188278, 30828.580048, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18246.768800, 25403.609400, 1533.464044, 1533.464044, 0.000000, X, Y) && !ellipse(17287.905411, 24949.304413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18400.136000, 25633.364000, 1455.984042, 1455.984042, 0.000000, X, Y) && !ellipse(16984.336000, 30503.694000, 1701.888049, 587.473617, 90.000000, X, Y) && !ellipse(13769.753800, 26768.954400, 848.096024, 848.096024, 0.000000, X, Y) && !ellipse(14843.775711, 25809.013519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13836.091202, 27479.600433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16589.488000, 29578.424000, 2071.856060, 2071.856060, 0.000000, X, Y) && !ellipse(16197.523600, 30100.974000, 1035.928030, 1035.928030, 0.000000, X, Y) && !ellipse(16912.914383, 27965.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17175.002000, 28484.914000, 1621.608047, 1621.608047, 0.000000, X, Y) && !ellipse(14762.382000, 29456.502000, 1774.344051, 1774.344051, 0.000000, X, Y) && !ellipse(13789.270000, 25740.662000, 966.584028, 966.584028, 0.000000, X, Y) && !ellipse(14276.176910, 23963.638062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16766.697937, 24757.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14345.950000, 25353.258000, 1766.720051, 1766.720051, 0.000000, X, Y) && !ellipse(18551.537399, 26834.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18781.889069, 23718.536377, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13661.175217, 24663.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14067.771400, 23781.132000, 1815.360052, 1815.360052, 0.000000, X, Y) && !ellipse(19068.395935, 25973.617371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14038.977921, 31037.031708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13678.459457, 30953.491211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15096.603531, 30415.938049, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:56 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src11.gif
[Thu Jun 21 09:43:00 2012] Mean detx,y = (-540.61, 7326.23) 
[Thu Jun 21 09:43:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 09:43:26 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 09:43:26 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 21 09:43:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 21 18:54:09 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:09 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 21 18:54:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:14 2012] Using photon index=1.80, rate=0.00664, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src11.arf
[Thu Jun 21 18:54:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:14 2012] Updating source flux to 8.2e-14
[Thu Jun 21 18:54:31 2012] Flag c found in src. 11 procflags, skipping spectral fitting