[Wed Jun 20 03:35:16 2012] Detection parameters:
  Position = (170.1, 286.7) = 23 2 9.60 58 52 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.8 +/- 24.2
  Background counts = 215.4
  Rate = 0.003 +/- 0.0007

[Wed Jun 20 03:35:17 2012] Off-axis axis estimate = 9.34'
[Wed Jun 20 04:12:48 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:12:48 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Wed Jun 20 04:12:48 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Wed Jun 20 04:12:48 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 11.10"
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src71.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src71.csv
[Wed Jun 20 09:38:49 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src71_1.ximg exists
[Wed Jun 20 09:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src71.csv
[Wed Jun 20 09:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:38:52 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Wed Jun 20 09:38:52 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Wed Jun 20 09:38:52 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Wed Jun 20 15:29:53 2012] Source 108 is offset by -2.301524 and -2.619613 pixels which is larger than
2 X fitted extent = 1.227297 x 1.227297, not incorporating fit results
[Wed Jun 20 15:29:53 2012] Spatial fit model total counts = 2853.540000, observed total counts = 2775.000000
[Wed Jun 20 15:29:53 2012] Offset between fit and detection position for source 108 = 7.088516 pixels
[Wed Jun 20 15:29:53 2012] Warning, changing simple spatial fit ID from 71 to 42
[Wed Jun 20 15:29:53 2012] 2827.291000 total counts/ 2308.010000 bgd. counts: snr = 10.808952
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 7.088516 pixels
  Position = (165.5, 292.0) = 23 2 12.24 58 53 13.6
  Extent = 22.1 (22.0-44.2)", rotation angle = 0
  Source counts = 519.3 +/- 53.2
  Background counts = 2308.0
  Rate = 0.01 +/- 0.001
[Wed Jun 20 15:29:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:29:53 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:29:53 2012] Source does appear to be extended
[Wed Jun 20 15:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:29:53 2012] Source is confused with source 2
[Wed Jun 20 15:41:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 15:41:50 2012] Initial guess for spatial extent in simple fitting = 22.08"
[Wed Jun 20 15:41:50 2012] source mask rpix=5.1, npix_max = 124, mask sum = 132, frac = 1.061
[Wed Jun 20 15:41:50 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 22.08"
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src65.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src65.csv
[Thu Jun 21 02:50:24 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src65_1.ximg exists
[Thu Jun 21 02:50:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src65.csv
[Thu Jun 21 02:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Thu Jun 21 02:50:30 2012] fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Thu Jun 21 02:50:30 2012] Fit fullrun_mos1_xmm0038140101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Thu Jun 21 08:47:48 2012] Warning, spatial fit 65 centroid is now closest to src. 42
[Thu Jun 21 08:47:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:47:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:47:48 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 08:47:48 2012] Source does appear to be extended
[Thu Jun 21 08:47:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:33:59 2012] XMMSAS src. selection expression = ellipse(14345.950000, 25353.258000, 1325.040038, 1325.040038, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing source region out to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src108_src.reg
[Thu Jun 21 09:33:59 2012] Extracting stamp from image fullrun_mos1_xmm0038140101_pi300-10000_cl_sm2.00.img.gz, (89, 216) - (242, 368)
[Thu Jun 21 09:33:59 2012] XMMSAS bgd. selection expression = annulus(14345.950000, 25353.258000, 2208.400064, 4416.800127, X, Y) && !ellipse(15645.246750, 25337.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16482.089417, 26682.419922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15166.367081, 29013.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12941.536163, 26738.539276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.378000, 27981.952600, 561.224016, 561.224016, 0.000000, X, Y) && !ellipse(17400.882000, 27524.226000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(16209.754000, 28130.968000, 3548.688102, 3548.688102, 0.000000, X, Y) && !ellipse(16560.564000, 28940.246000, 1444.608042, 1444.608042, 0.000000, X, Y) && !ellipse(15695.846000, 28242.946000, 1708.344049, 1708.344049, 0.000000, X, Y) && !ellipse(17691.108780, 27080.252167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17284.278000, 25958.471800, 1628.848047, 1628.848047, 0.000000, X, Y) && !ellipse(16992.769699, 26440.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15487.413223, 26956.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.078049, 25798.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.322800, 26331.297607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14147.132200, 31549.336000, 1890.824054, 1890.824054, 0.000000, X, Y) && !ellipse(14452.403152, 26366.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18217.620000, 24037.666000, 1526.192044, 1526.192044, 0.000000, X, Y) && !ellipse(14896.041290, 22068.606918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16217.186523, 29178.917419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14747.735336, 26843.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15726.765200, 24485.795800, 722.816021, 722.816021, 0.000000, X, Y) && !ellipse(16717.188278, 30828.580048, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18246.768800, 25403.609400, 1533.464044, 1533.464044, 0.000000, X, Y) && !ellipse(17287.905411, 24949.304413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18400.136000, 25633.364000, 1455.984042, 1455.984042, 0.000000, X, Y) && !ellipse(16984.336000, 30503.694000, 1701.888049, 587.473617, 90.000000, X, Y) && !ellipse(13769.753800, 26768.954400, 848.096024, 848.096024, 0.000000, X, Y) && !ellipse(14843.775711, 25809.013519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13836.091202, 27479.600433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16589.488000, 29578.424000, 2071.856060, 2071.856060, 0.000000, X, Y) && !ellipse(16197.523600, 30100.974000, 1035.928030, 1035.928030, 0.000000, X, Y) && !ellipse(15829.000000, 23414.920502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16912.914383, 27965.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17175.002000, 28484.914000, 1621.608047, 1621.608047, 0.000000, X, Y) && !ellipse(14762.382000, 29456.502000, 1774.344051, 1774.344051, 0.000000, X, Y) && !ellipse(13789.270000, 25740.662000, 966.584028, 966.584028, 0.000000, X, Y) && !ellipse(13548.242000, 19486.782000, 1749.656050, 1749.656050, 0.000000, X, Y) && !ellipse(14276.176910, 23963.638062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16766.697937, 24757.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18551.537399, 26834.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18781.889069, 23718.536377, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13661.175217, 24663.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14067.771400, 23781.132000, 1815.360052, 1815.360052, 0.000000, X, Y) && !ellipse(19068.395935, 25973.617371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13799.922000, 19057.862880, 3067.760088, 1871.600054, 242.835000, X, Y) && !ellipse(16411.008972, 23325.692932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15096.603531, 30415.938049, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 09:33:59 2012] Writing fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src108.gif
[Thu Jun 21 10:49:26 2012] Mean detx,y = (2346.26, 9585.42) 
[Thu Jun 21 10:49:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 10:50:01 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 10:50:02 2012] Setting source spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Thu Jun 21 10:50:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src108_bgd.pi.gz
[Thu Jun 21 18:54:11 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:54:11 2012] Error reading totcts from fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Thu Jun 21 18:54:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:54:19 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos1_xmm0038140101_pi300-10000_pass1_cl_src108.arf
[Thu Jun 21 18:54:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:54:19 2012] Updating source flux to 1.4e-13
[Thu Jun 21 18:54:31 2012] Flag b found in src. 108 procflags, skipping spectral fitting
[Thu Jun 21 18:54:31 2012] Flag c found in src. 108 procflags, skipping spectral fitting