[Fri Aug 17 15:53:37 2012] Detection parameters:
  Position = (456.6, 350.9) = 20 42 58.11 27 43 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.8 +/- 9.2
  Background counts = 4.4
  Rate = 0.006 +/- 0.001

[Fri Aug 17 15:53:37 2012] Off-axis axis estimate = 12.08'
[Fri Aug 17 16:02:02 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:02:02 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Fri Aug 17 16:02:02 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.927
[Fri Aug 17 16:02:02 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.47"
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Aug 17 16:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src5.csv
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Aug 17 16:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src5.csv
[Fri Aug 17 16:38:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 17 16:38:16 2012] Fit fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Aug 17 17:12:18 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.596589 pixels away
[Fri Aug 17 17:12:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 17:12:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 17:12:18 2012] Assessing source extent using major
[Fri Aug 17 17:12:18 2012] Source does appear to be extended
[Fri Aug 17 17:12:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 17:14:53 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 17:14:53 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Fri Aug 17 17:14:53 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.927
[Fri Aug 17 17:14:53 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.47"
[Fri Aug 17 17:39:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug 17 17:39:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_src5.csv
[Fri Aug 17 17:39:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug 17 17:39:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_src5.csv
[Fri Aug 17 17:39:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 17:39:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 17 17:39:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 17 17:39:16 2012] Fit fullrun_mos1_xmm0037990101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Aug 17 18:06:49 2012] Spatial fit model total counts = 108.999000, observed total counts = 109.000000
[Fri Aug 17 18:06:49 2012] Offset between fit and detection position for source 5 = 0.228811 pixels
[Fri Aug 17 18:06:49 2012] 106.566300 total counts/ 66.901000 bgd. counts: snr = 4.849472
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.228811 pixels
  Position = (456.4, 350.8) = 20 42 58.18 27 43 53.5
  Extent = 7.5 (5.5-11.1)", rotation angle = 0
  Source counts = 39.7 +/- 10.3
  Background counts = 66.9
  Rate = 0.002 +/- 0.0006
[Fri Aug 17 18:06:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 18:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 18:06:49 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 18:06:49 2012] Source does appear to be extended
[Fri Aug 17 18:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 18:15:23 2012] XMMSAS src. selection expression = ellipse(39654.881600, 30474.898200, 451.576813, 451.576813, 0.000000, X, Y)
[Fri Aug 17 18:15:23 2012] Writing source region out to fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src5_src.reg
[Fri Aug 17 18:15:23 2012] Extracting stamp from image fullrun_mos1_xmm0037990101_pi300-10000_cl_sm2.00.img.gz, (430, 325) - (482, 377)
[Fri Aug 17 18:15:23 2012] XMMSAS bgd. selection expression = annulus(39654.881600, 30474.898200, 752.628022, 1505.256043, X, Y)
[Fri Aug 17 18:15:23 2012] Writing fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src5.gif
[Fri Aug 17 18:16:49 2012] Mean detx,y = (8696.64, 9000.50) 
[Fri Aug 17 18:16:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 18:16:57 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 18:16:57 2012] Setting source spectrum file to fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug 17 18:16:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Aug 17 18:21:17 2012] Not generating rmf since there are only 39 counts
[Fri Aug 17 18:21:17 2012] rmf not generated due to insufficient counts
[Fri Aug 17 18:30:15 2012] Updating aperture counts using extracted products
[Fri Aug 17 18:30:15 2012] Error reading totcts from fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug 17 18:30:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 18:30:15 2012] Using photon index=1.80, rate=0.00238, arf fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src5.arf
[Fri Aug 17 18:30:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 18:30:15 2012] Updating source flux to 4.8e-14
[Fri Aug 17 18:30:16 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 17 18:30:17 2012] xmm0037990101/analysis//spectral/fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete