[Fri Aug 17 15:53:37 2012] Detection parameters:
  Position = (348.5, 225.3) = 20 43 33.53 27 34 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.6 +/- 10.0
  Background counts = 5.7
  Rate = 0.005 +/- 0.001

[Fri Aug 17 15:53:37 2012] Off-axis axis estimate = 6.43'
[Fri Aug 17 16:02:02 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:02:02 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Fri Aug 17 16:02:02 2012] source mask rpix=2.2, npix_max = 29, mask sum = 17, frac = 0.576
[Fri Aug 17 16:02:02 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.64"
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src7.ximg exists
[Fri Aug 17 16:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src7.csv
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Aug 17 16:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src7.csv
[Fri Aug 17 16:38:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Aug 17 16:38:16 2012] fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Aug 17 16:38:16 2012] Fit fullrun_mos1_xmm0037990101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Aug 17 17:12:18 2012] Spatial fit model total counts = 126.883000, observed total counts = 127.000000
[Fri Aug 17 17:12:18 2012] Offset between fit and detection position for source 10 = 1.217710 pixels
[Fri Aug 17 17:12:18 2012] 125.460100 total counts/ 74.169300 bgd. counts: snr = 5.955626
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.217710 pixels
  Position = (347.8, 224.3) = 20 43 33.77 27 34 43.4
  Extent = 9.0 (6.0-13.6)", rotation angle = 0
  Source counts = 51.3 +/- 11.2
  Background counts = 74.2
  Rate = 0.003 +/- 0.0007
[Fri Aug 17 17:12:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 17:12:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 17:12:18 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 17:12:18 2012] Source does appear to be extended
[Fri Aug 17 17:12:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 17:14:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 17:14:53 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Fri Aug 17 17:14:53 2012] source mask rpix=2.1, npix_max = 26, mask sum = 13, frac = 0.495
[Fri Aug 17 17:14:53 2012] Skipping simple spatial due to low active detector fraction
[Fri Aug 17 18:06:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 18:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 18:06:49 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 18:06:49 2012] Source does appear to be extended
[Fri Aug 17 18:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 18:15:23 2012] XMMSAS src. selection expression = ellipse(30211.049220, 19463.524000, 538.420815, 538.420815, 0.000000, X, Y)
[Fri Aug 17 18:15:23 2012] Writing source region out to fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src10_src.reg
[Fri Aug 17 18:15:23 2012] Extracting stamp from image fullrun_mos1_xmm0037990101_pi300-10000_cl_sm2.00.img.gz, (317, 193) - (379, 255)
[Fri Aug 17 18:15:23 2012] XMMSAS bgd. selection expression = annulus(30211.049220, 19463.524000, 897.368026, 1794.736052, X, Y) && !ellipse(29049.760864, 19079.602814, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 18:15:23 2012] Writing fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src10.gif
[Fri Aug 17 18:17:26 2012] Mean detx,y = (-5363.31, 5304.44) 
[Fri Aug 17 18:17:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 18:17:49 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 18:17:49 2012] Setting source spectrum file to fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Aug 17 18:17:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Aug 17 18:21:37 2012] Not generating rmf since there are only 51 counts
[Fri Aug 17 18:21:37 2012] rmf not generated due to insufficient counts
[Fri Aug 17 18:30:15 2012] Updating aperture counts using extracted products
[Fri Aug 17 18:30:15 2012] Error reading totcts from fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Aug 17 18:30:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 18:30:15 2012] Using photon index=1.80, rate=0.00308, arf fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src10.arf
[Fri Aug 17 18:30:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 18:30:15 2012] Updating source flux to 4.9e-14
[Fri Aug 17 18:30:16 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 17 18:30:17 2012] xmm0037990101/analysis//spectral/fullrun_mos1_xmm0037990101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete