[Mon May 13 00:57:04 2013] Detection parameters:
  Position = (308.5, 445.6) = 2 21 11.90 -2 58 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.0 +/- 9.6
  Background counts = 17.9
  Rate = 0.003 +/- 0.0006

[Mon May 13 00:57:04 2013] Off-axis axis estimate = 10.69'
[Mon May 13 00:59:18 2013] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:59:18 2013] Initial guess for spatial extent in simple fitting = 11.77"
[Mon May 13 00:59:18 2013] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.191
[Mon May 13 00:59:18 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 11.77"
[Mon May 13 01:56:34 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src30.ximg exists
[Mon May 13 01:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src30.csv
[Mon May 13 01:56:34 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon May 13 01:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src30.csv
[Mon May 13 01:56:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 01:56:35 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon May 13 01:56:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon May 13 01:56:35 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon May 13 01:56:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon May 13 01:56:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:04:14 2013] Warning, spatial fit 30 centroid is now closest to src. 9
[Mon May 13 03:04:14 2013] Vigneting correction estimate = 1.000000
[Mon May 13 03:04:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 03:04:14 2013] Assessing source extent using major
[Mon May 13 03:04:14 2013] Source does appear to be extended
[Mon May 13 03:04:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 03:04:30 2013] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Mon May 13 03:04:30 2013] Initial guess for spatial extent in simple fitting = 11.77"
[Mon May 13 03:04:30 2013] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.191
[Mon May 13 03:04:30 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 11.77"
[Mon May 13 03:52:31 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src29.ximg exists
[Mon May 13 03:52:31 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon May 13 03:52:31 2013] Fit fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src29 appears to have run properly
[Mon May 13 03:52:32 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon May 13 03:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon May 13 03:52:32 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon May 13 03:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon May 13 03:52:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 04:57:04 2013] Spatial fit model total counts = 171.027000, observed total counts = 166.000000
[Mon May 13 04:57:04 2013] Offset between fit and detection position for source 31 = 1.068002 pixels
[Mon May 13 04:57:04 2013] 153.170500 total counts/ 87.356800 bgd. counts: snr = 7.041545
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.068002 pixels
  Position = (309.6, 445.3) = 2 21 11.60 -2 58 11.0
  Extent = 23.5 (9.3-47.1)" x 5.2 (3.3-8.4)", rotation angle = 17 (6-38) degrees
  Source counts = 65.8 +/- 12.4
  Background counts = 87.4
  Rate = 0.005 +/- 0.0009
[Mon May 13 04:57:04 2013] Vigneting correction estimate = 1.000000
[Mon May 13 04:57:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 04:57:04 2013] Assessing source extent using major axis lower bound
[Mon May 13 04:57:04 2013] Source does appear to be extended
[Mon May 13 04:57:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Mon May 13 04:57:04 2013] Source is confused with source 9
[Mon May 13 04:57:20 2013] XMMSAS src. selection expression = ellipse(26883.581200, 38694.878200, 1412.880041, 314.415009, 16.753600, X, Y)
[Mon May 13 04:57:20 2013] Writing source region out to fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31_src.reg
[Mon May 13 04:57:20 2013] Extracting stamp from image fullrun_pn_xmm0037982701_pi300-10000_cl_sm2.00.img.gz, (228, 364) - (391, 527)
[Mon May 13 04:57:20 2013] XMMSAS bgd. selection expression = annulus(26883.581200, 38694.878200, 2354.800068, 4709.600136, X, Y) && !ellipse(25742.170502, 38046.688721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23200.394135, 38371.175781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.918640, 34702.101400, 751.355222, 318.284809, 342.543800, X, Y) && !ellipse(26285.649600, 34267.475200, 508.152815, 508.152815, 0.000000, X, Y)
[Mon May 13 04:57:20 2013] Writing fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31.gif
[Mon May 13 05:13:10 2013] Mean detx,y = (1256.44, 13954.50) 
[Mon May 13 05:13:13 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 05:14:22 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 05:14:22 2013] Setting source spectrum file to fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 13 05:14:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon May 13 05:40:43 2013] Not generating rmf since there are only 65 counts
[Mon May 13 05:40:43 2013] rmf not generated due to insufficient counts
[Mon May 13 05:57:35 2013] Updating aperture counts using extracted products
[Mon May 13 05:57:35 2013] Total counts from fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 128.00
[Mon May 13 05:57:35 2013] Total counts from fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31_bgd.pi.gz = 1643.00
[Mon May 13 05:57:35 2013] Got source and background scale factors 844636.000000, 16914083.000000
[Mon May 13 05:57:35 2013] User source parameters:
  Position = (309.6, 445.3) = 2 21 11.60 -2 58 11.0
  Extent = 23.5 (9.3-47.1)" x 5.2 (3.3-8.4)", rotation angle = 17 (6-38) degrees
  Source aperture counts = 46.0 +/- 12.3
  Background aperture counts = 82.0
  Rate = 0.003 +/- 0.0009

[Mon May 13 05:57:35 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:57:35 2013] Using photon index=1.80, rate=0.00462, arf fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31.arf
[Mon May 13 05:57:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:57:35 2013] Updating source flux to 3.2e-14
[Mon May 13 05:57:45 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Mon May 13 05:57:45 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 05:57:50 2013] xmm0037982701/analysis//spectral/fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete