[Mon May 13 00:57:04 2013] Detection parameters:
  Position = (266.0, 334.8) = 2 21 24.26 -3 6 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.9 +/- 13.9
  Background counts = 22.6
  Rate = 0.009 +/- 0.001

[Mon May 13 00:57:04 2013] Off-axis axis estimate = 3.53'
[Mon May 13 00:59:18 2013] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:59:18 2013] Initial guess for spatial extent in simple fitting = 8.20"
[Mon May 13 00:59:18 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.880
[Mon May 13 00:59:18 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.20"
[Mon May 13 01:56:34 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src20.ximg exists
[Mon May 13 01:56:34 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May 13 01:56:34 2013] Fit fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_src20 appears to have run properly
[Mon May 13 01:56:35 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May 13 01:56:35 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May 13 01:56:35 2013] Fit fullrun_pn_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Mon May 13 03:04:14 2013] Spatial fit model total counts = 348.740000, observed total counts = 350.000000
[Mon May 13 03:04:14 2013] Offset between fit and detection position for source 20 = 4.684671 pixels
[Mon May 13 03:04:14 2013] 405.990000 total counts/ 106.276000 bgd. counts: snr = 29.072972
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 4.684671 pixels
  Position = (261.4, 333.6) = 2 21 25.57 -3 6 17.2
  Extent = 16.4 (16.4-32.8)", rotation angle = 0
  Source counts = 299.7 +/- 20.1
  Background counts = 106.3
  Rate = 0.02 +/- 0.001
[Mon May 13 03:04:14 2013] Vigneting correction estimate = 1.000000
[Mon May 13 03:04:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 03:04:14 2013] Assessing source extent using major axis lower bound
[Mon May 13 03:04:14 2013] Source does appear to be extended
[Mon May 13 03:04:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 03:04:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 03:04:30 2013] Initial guess for spatial extent in simple fitting = 16.39"
[Mon May 13 03:04:30 2013] source mask rpix=3.8, npix_max = 72, mask sum = 57, frac = 0.782
[Mon May 13 03:04:30 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 16.39"
[Mon May 13 03:52:31 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 13 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src20.csv
[Mon May 13 03:52:31 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 13 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src20.csv
[Mon May 13 03:52:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:52:32 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 13 03:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 13 03:52:32 2013] fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 13 03:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 13 03:52:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 04:57:04 2013] Warning, spatial fit 20 centroid is now closest to src. 30
[Mon May 13 04:57:04 2013] Vigneting correction estimate = 1.000000
[Mon May 13 04:57:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 04:57:04 2013] Assessing source extent using major axis lower bound
[Mon May 13 04:57:04 2013] Source does appear to be extended
[Mon May 13 04:57:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 04:57:20 2013] XMMSAS src. selection expression = ellipse(22697.078000, 28971.864000, 983.526028, 983.526028, 0.000000, X, Y)
[Mon May 13 04:57:20 2013] Writing source region out to fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20_src.reg
[Mon May 13 04:57:20 2013] Extracting stamp from image fullrun_pn_xmm0037982701_pi300-10000_cl_sm2.00.img.gz, (205, 277) - (318, 390)
[Mon May 13 04:57:20 2013] XMMSAS bgd. selection expression = annulus(22697.078000, 28971.864000, 1639.210047, 3278.420094, X, Y) && !ellipse(23661.239000, 29496.768200, 440.236813, 330.009609, 3.478840, X, Y) && !ellipse(22911.419800, 25871.575940, 434.958413, 256.700807, 28.963569, X, Y) && !ellipse(25447.645447, 31000.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18597.758804, 29578.409058, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 04:57:20 2013] Writing fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20.gif
[Mon May 13 05:07:39 2013] Mean detx,y = (2560.02, 3743.23) 
[Mon May 13 05:07:42 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 05:08:21 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 05:08:21 2013] Setting source spectrum file to fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon May 13 05:08:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon May 13 05:57:33 2013] Updating aperture counts using extracted products
[Mon May 13 05:57:33 2013] Total counts from fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 319.00
[Mon May 13 05:57:33 2013] Total counts from fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20_bgd.pi.gz = 2207.00
[Mon May 13 05:57:33 2013] Got source and background scale factors 2391521.000000, 21474808.000000
[Mon May 13 05:57:33 2013] User source parameters:
  Position = (261.4, 333.6) = 2 21 25.57 -3 6 17.2
  Extent = 16.4 (16.4-32.8)", rotation angle = 0
  Source aperture counts = 73.2 +/- 18.9
  Background aperture counts = 245.8
  Rate = 0.005 +/- 0.001

[Mon May 13 05:57:35 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:57:35 2013] Using photon index=1.80, rate=0.021, arf fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20.arf
[Mon May 13 05:57:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:57:35 2013] Updating source flux to 6.9e-14
[Mon May 13 05:57:50 2013] xmm0037982701/analysis//spectral/fullrun_pn_xmm0037982701_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete