[Mon May 13 00:57:52 2013] Detection parameters:
  Position = (258.5, 363.1) = 2 21 26.43 -3 4 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.2 +/- 8.7
  Background counts = 8.4
  Rate = 0.003 +/- 0.0006

[Mon May 13 00:57:52 2013] Off-axis axis estimate = 5.51'
[Mon May 13 02:34:26 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Mon May 13 02:34:26 2013] Initial guess for spatial extent in simple fitting = 9.18"
[Mon May 13 02:34:26 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.100
[Mon May 13 02:34:26 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.18"
[Mon May 13 03:04:08 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 13 03:04:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_src11.csv
[Mon May 13 03:04:08 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 13 03:04:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_src11.csv
[Mon May 13 03:04:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:04:08 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 13 03:04:08 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 13 03:04:08 2013] Fit fullrun_mos2_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 13 03:04:21 2013] Spatial fit model total counts = 104.768000, observed total counts = 99.000000
[Mon May 13 03:04:21 2013] Offset between fit and detection position for source 12 = 0.130386 pixels
[Mon May 13 03:04:21 2013] 105.997000 total counts/ 74.902500 bgd. counts: snr = 3.592820
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.130386 pixels
  Position = (258.6, 363.0) = 2 21 26.41 -3 4 9.3
  Extent = 5.7 (4.0-7.9)", rotation angle = 0
  Source counts = 31.1 +/- 10.3
  Background counts = 74.9
  Rate = 0.002 +/- 0.0006
[Mon May 13 03:04:21 2013] Vigneting correction estimate = 1.000000
[Mon May 13 03:04:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 03:04:21 2013] Assessing source extent using major axis lower bound
[Mon May 13 03:04:21 2013] Source does appear to be extended
[Mon May 13 03:04:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 04:25:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 04:25:50 2013] Initial guess for spatial extent in simple fitting = 5.73"
[Mon May 13 04:25:50 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.909
[Mon May 13 04:25:50 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 5.73"
[Mon May 13 04:56:58 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 13 04:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_src11.csv
[Mon May 13 04:56:58 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 13 04:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_src11.csv
[Mon May 13 04:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 04:56:58 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 13 04:56:58 2013] fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 13 04:56:58 2013] Fit fullrun_mos2_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon May 13 04:57:11 2013] Spatial fit model total counts = 104.768000, observed total counts = 99.000000
[Mon May 13 04:57:11 2013] Offset between fit and detection position for source 12 = 0.000027 pixels
[Mon May 13 04:57:11 2013] 105.997300 total counts/ 74.903200 bgd. counts: snr = 3.592757
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.000027 pixels
  Position = (258.6, 363.0) = 2 21 26.41 -3 4 9.3
  Extent = 5.7 (4.0-7.9)", rotation angle = 0
  Source counts = 31.1 +/- 10.3
  Background counts = 74.9
  Rate = 0.002 +/- 0.0006
[Mon May 13 04:57:11 2013] Vigneting correction estimate = 1.000000
[Mon May 13 04:57:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 04:57:11 2013] Assessing source extent using major axis lower bound
[Mon May 13 04:57:11 2013] Source does appear to be extended
[Mon May 13 04:57:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:50:32 2013] XMMSAS src. selection expression = ellipse(22445.658600, 31529.542400, 343.541958, 343.541958, 0.000000, X, Y)
[Mon May 13 05:50:32 2013] Writing source region out to fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12_src.reg
[Mon May 13 05:50:32 2013] Extracting stamp from image fullrun_mos2_xmm0037982701_pi300-10000_cl_sm2.00.img.gz, (239, 343) - (278, 383)
[Mon May 13 05:50:32 2013] XMMSAS bgd. selection expression = annulus(22445.658600, 31529.542400, 572.569929, 1145.139859, X, Y) && !ellipse(20701.475000, 33273.108400, 1817.688052, 228.962407, 72.330175, X, Y)
[Mon May 13 05:50:32 2013] Writing fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12.gif
[Mon May 13 05:52:49 2013] Mean detx,y = (-3536.76, -6226.85) 
[Mon May 13 05:52:50 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 05:53:09 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 05:53:09 2013] Setting source spectrum file to fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon May 13 05:53:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon May 13 05:56:15 2013] Not generating rmf since there are only 31 counts
[Mon May 13 05:56:15 2013] rmf not generated due to insufficient counts
[Mon May 13 05:57:41 2013] Updating aperture counts using extracted products
[Mon May 13 05:57:41 2013] Total counts from fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 46.00
[Mon May 13 05:57:41 2013] Total counts from fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12_bgd.pi.gz = 116.00
[Mon May 13 05:57:41 2013] Got source and background scale factors 377116.000000, 2687240.000000
[Mon May 13 05:57:41 2013] User source parameters:
  Position = (258.6, 363.0) = 2 21 26.41 -3 4 9.3
  Extent = 5.7 (4.0-7.9)", rotation angle = 0
  Source aperture counts = 29.7 +/- 7.8
  Background aperture counts = 16.3
  Rate = 0.002 +/- 0.0004

[Mon May 13 05:57:42 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:57:42 2013] Using photon index=1.80, rate=0.00171, arf fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12.arf
[Mon May 13 05:57:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:57:42 2013] Updating source flux to 2.6e-14
[Mon May 13 05:57:44 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 05:57:45 2013] xmm0037982701/analysis//spectral/fullrun_mos2_xmm0037982701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete