[Mon May 13 00:57:29 2013] Detection parameters:
  Position = (241.8, 351.1) = 2 21 31.28 -3 4 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.8 +/- 7.7
  Background counts = 8.2
  Rate = 0.002 +/- 0.0005

[Mon May 13 00:57:30 2013] Off-axis axis estimate = 5.61'
[Mon May 13 01:56:35 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Mon May 13 01:56:35 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Mon May 13 01:56:35 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Mon May 13 01:56:35 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.23"
[Mon May 13 02:34:26 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_src21.ximg exists
[Mon May 13 02:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_src21.csv
[Mon May 13 02:34:26 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon May 13 02:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_src21.csv
[Mon May 13 02:34:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 02:34:26 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon May 13 02:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May 13 02:34:26 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon May 13 02:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May 13 02:34:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037982701_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:04:18 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.781679 pixels away
[Mon May 13 03:04:18 2013] Vigneting correction estimate = 1.000000
[Mon May 13 03:04:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 03:04:18 2013] Assessing source extent using major
[Mon May 13 03:04:18 2013] Source does appear to be extended
[Mon May 13 03:04:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 03:52:32 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Mon May 13 03:52:32 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Mon May 13 03:52:32 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Mon May 13 03:52:32 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.23"
[Mon May 13 04:25:50 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 13 04:25:50 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 13 04:25:50 2013] Fit fullrun_mos1_xmm0037982701_pi300-10000_cl_pass1_src20 appears to have run properly
[Mon May 13 04:25:50 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 13 04:25:50 2013] fullrun_mos1_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 13 04:25:50 2013] Fit fullrun_mos1_xmm0037982701_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon May 13 04:57:08 2013] Spatial fit model total counts = 99.986700, observed total counts = 99.000000
[Mon May 13 04:57:08 2013] Offset between fit and detection position for source 14 = 0.272959 pixels
[Mon May 13 04:57:08 2013] 100.867100 total counts/ 77.234300 bgd. counts: snr = 2.689119
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.272959 pixels
  Position = (242.0, 351.1) = 2 21 31.21 -3 5 1.0
  Extent = 5.7 (3.4-8.9)", rotation angle = 0
  Source counts = 23.6 +/- 10.0
  Background counts = 77.2
  Rate = 0.001 +/- 0.0006
[Mon May 13 04:57:08 2013] Vigneting correction estimate = 1.000000
[Mon May 13 04:57:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 04:57:08 2013] Assessing source extent using major axis lower bound
[Mon May 13 04:57:08 2013] Source does appear to be extended
[Mon May 13 04:57:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:40:52 2013] XMMSAS src. selection expression = ellipse(21009.394220, 30494.666400, 339.876098, 339.876098, 0.000000, X, Y)
[Mon May 13 05:40:52 2013] Writing source region out to fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14_src.reg
[Mon May 13 05:40:52 2013] Extracting stamp from image fullrun_mos1_xmm0037982701_pi300-10000_cl_sm2.00.img.gz, (223, 332) - (262, 371)
[Mon May 13 05:40:52 2013] XMMSAS bgd. selection expression = annulus(21009.394220, 30494.666400, 566.460164, 1132.920328, X, Y) && !ellipse(22467.417300, 31533.396400, 532.061866, 532.061866, 0.000000, X, Y)
[Mon May 13 05:40:52 2013] Writing fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14.gif
[Mon May 13 05:46:53 2013] Mean detx,y = (-4645.64, 4492.72) 
[Mon May 13 05:46:54 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 05:47:01 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 05:47:02 2013] Setting source spectrum file to fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 13 05:47:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 13 05:50:04 2013] Not generating rmf since there are only 23 counts
[Mon May 13 05:50:04 2013] rmf not generated due to insufficient counts
[Mon May 13 05:57:38 2013] Updating aperture counts using extracted products
[Mon May 13 05:57:38 2013] Total counts from fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 39.00
[Mon May 13 05:57:38 2013] Total counts from fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14_bgd.pi.gz = 132.00
[Mon May 13 05:57:38 2013] Got source and background scale factors 361600.000000, 2832820.000000
[Mon May 13 05:57:38 2013] User source parameters:
  Position = (242.0, 351.1) = 2 21 31.21 -3 5 1.0
  Extent = 5.7 (3.4-8.9)", rotation angle = 0
  Source aperture counts = 22.2 +/- 7.3
  Background aperture counts = 16.8
  Rate = 0.001 +/- 0.0004

[Mon May 13 05:57:39 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:57:39 2013] Using photon index=1.80, rate=0.0013, arf fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14.arf
[Mon May 13 05:57:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:57:39 2013] Updating source flux to 1.7e-14
[Mon May 13 05:57:43 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 05:57:44 2013] xmm0037982701/analysis//spectral/fullrun_mos1_xmm0037982701_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete