[Mon Jun  3 00:39:32 2013] Detection parameters:
  Position = (263.0, 337.0) = 2 20 45.07 -3 26 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.7 +/- 12.2
  Background counts = 17.9
  Rate = 0.009 +/- 0.001

[Mon Jun  3 00:39:34 2013] Off-axis axis estimate = 3.80'
[Mon Jun  3 00:40:11 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:40:11 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Mon Jun  3 00:40:11 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.686
[Mon Jun  3 00:40:11 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.33"
[Mon Jun  3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jun  3 00:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src6.csv
[Mon Jun  3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jun  3 00:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src6.csv
[Mon Jun  3 00:40:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jun  3 00:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jun  3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jun  3 00:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jun  3 00:40:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:40:24 2013] Spatial fit model total counts = 296.303000, observed total counts = 250.000000
[Mon Jun  3 00:40:24 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 00:40:24 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:40:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:40:24 2013] Assessing source extent using major
[Mon Jun  3 00:40:24 2013] Source does appear to be extended
[Mon Jun  3 00:40:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:40:46 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:40:46 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Mon Jun  3 00:40:46 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.686
[Mon Jun  3 00:40:46 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.33"
[Mon Jun  3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jun  3 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src6.csv
[Mon Jun  3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jun  3 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src6.csv
[Mon Jun  3 00:40:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jun  3 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun  3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jun  3 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun  3 00:40:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:40:59 2013] Spatial fit model total counts = 296.353000, observed total counts = 250.000000
[Mon Jun  3 00:40:59 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 00:40:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:40:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:40:59 2013] Assessing source extent using major
[Mon Jun  3 00:40:59 2013] Source does appear to be extended
[Mon Jun  3 00:40:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:41:21 2013] XMMSAS src. selection expression = ellipse(22832.311493, 29271.187653, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  3 00:41:21 2013] Not overwriting source region fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun  3 00:41:21 2013] Extracting stamp from image fullrun_pn_xmm0037982601_pi300-10000_cl_sm2.00.img.gz, (225, 300) - (300, 375)
[Mon Jun  3 00:41:21 2013] XMMSAS bgd. selection expression = annulus(22832.311493, 29271.187653, 1087.500000, 2175.000000, X, Y) && !ellipse(23928.677400, 28102.747800, 332.643210, 332.643210, 0.000000, X, Y)
[Mon Jun  3 00:41:21 2013] Writing fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6.gif
[Mon Jun  3 00:41:22 2013] ../../xmm0037982601/products/events/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0037982601/products/events/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Jun  3 00:41:22 2013] Mean detx,y = (2666.08, 4037.37) 
[Mon Jun  3 00:41:22 2013] ../../xmm0037982601/products/images/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_src.img and ../../xmm0037982601/products/images/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Jun  3 00:41:22 2013] ../../xmm0037982601/products/spectra/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0037982601/products/spectra/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Jun  3 00:41:22 2013] Setting source spectrum file to fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun  3 00:41:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jun  3 00:41:22 2013] ../../xmm0037982601/products/lightcurves/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0037982601/products/lightcurves/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Jun  3 00:41:33 2013] Not generating rmf since there are only 74 counts
[Mon Jun  3 00:41:33 2013] rmf not generated due to insufficient counts
[Mon Jun  3 00:41:33 2013] fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Mon Jun  3 01:07:03 2013] Updating aperture counts using extracted products
[Mon Jun  3 01:07:03 2013] Total counts from fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 213.00
[Mon Jun  3 01:07:03 2013] Total counts from fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_bgd.pi.gz = 733.00
[Mon Jun  3 01:07:03 2013] Got source and background scale factors 1159344.000000, 9664364.000000
[Mon Jun  3 01:07:03 2013] User source parameters:
  Position = (263.0, 337.0) = 2 20 45.07 -3 26 3.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 125.1 +/- 15.6
  Background aperture counts = 87.9
  Rate = 0.01 +/- 0.001

[Mon Jun  3 01:07:03 2013] Updating counts from extracted products
[Mon Jun  3 01:07:03 2013] Set source signif. to 125.07/9.38 = 13.34
[Mon Jun  3 01:07:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 01:07:10 2013] Using photon index=1.80, rate=0.0111, arf fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6.arf
[Mon Jun  3 01:07:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 01:07:10 2013] Updating source flux to 3.7e-14
[Mon Jun  3 01:07:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 01:07:38 2013] xmm0037982601/analysis//spectral/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete